2585 - Doosan Lathe and Vertical Machining Centre's surplus to requirements at James Brown Industries

Engineering

Auction ends on

2017-05-25 15:00:00.0
Add to calendar

Time left

0 Days, 12 Hours, 44 Mins

Auction description

Please Note: These Lots are located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Buyers premium

Buyers Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing will be available by appointment only with the Auctioneer.

Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2017-05-30 17:00:00.0

Final clearance date

2017-06-08 17:00:00.0

Shipping agents

Storage contractors

Number of lots per page

Lots 1-3 of 3

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
25 May 2017 15:00:00 BST
Time left:
0 days 12 hrs 44 mins 11 secs
Increment:
£500
Bids:
29
Current bid:
£15000
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 1: Doosan Puma 2600M 3 Axis Lathe

Doosan Puma 2600M 3 Axis Lathe with Doosan-Fanuc I Control, Maximum Spindle Speeds Main 3500rpm, Milling speed 5000rpm, Axis travels X=260mm Z=830mm C=360 degrees (0.001), Rapid feed rates X/Z=30m/min, 12/24, Station Turret (half indexing), Distance between centre’s 800mm, 76mm spindle Bore, Programable Tailstock., 3 Jaw Chuck (to be fitted), Tool Presetter, Parts Catcher, Swarf Conveyor, Machine has (2) x Driven Tools and (2) Z Driven Tools, Set of Manuals. S/No. ML0103-000377 (2012)

Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Ends:
25 May 2017 15:00:00 BST
Time left:
0 days 12 hrs 44 mins 11 secs
Increment:
£500
Bids:
19
Current bid:
£22000
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 2: Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre

Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=762mm, Y=516mm, Z=570mm, (Note X=764mm Y=519mm Z=573mm set in parameters), Rapid Feed Rates X/Y=40m/min Z=32 m/min, 30 Station ATC, Table Dimensions 860mm x 570mm, Load per Pallet 350kg, Swarf Conveyor, Through Spindle Coolant, Spindle Oil Chiller. S/No. V0061-000073 (02/2012)

Please Note: Tooling and Fixtures are not included in this lot.

Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Ends:
25 May 2017 15:00:00 BST
Time left:
0 days 12 hrs 44 mins 11 secs
Increment:
£500
Bids:
17
Current bid:
£20500
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 3: Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre

Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=762mm, Y=516mm, Z=570mm, (Note X=764mm Y=518mm Z=579mm set in parameters), Rapid Feed Rates X/Y=40m/min Z=32 m/min, 30 Station ATC, Table Dimensions 860mm x 570mm, Load per Pallet 350kg, Swarf Conveyor, Through Spindle Coolant, Spindle Oil Chiller. S/No. V0026-000018 (07/2011)

Please Note: Tooling and Fixtures are not included in this lot.

Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking