2566 - CNC Woodworking Equipment and Ancillary Items no Longer required by Riverside Joinery Ltd
Woodworking
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 47
Los 1: Masterwood Mode Project 400 CNC Router
Masterwood Mode Project 400 CNC Router, 12 ATC, Bed Size: 5m x 1.25m. S/No. 07080006 (2007) with Becker Picchio 2200 Pump. S/No. C2212188 (2007) and Dust Extraction Unit
Please Note: Any partitioning shown in the photographs are not included with this
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 2: Masterwood Model Project 415L CNC Router
Masterwood Model Project 415L CNC Router, Bed Size: 5m x 1.25m with Becker Picchio Pump and Airmaster M25E Dust Extraction. S/No. 971181780 (2006) (Please Note: The Spindle Drive Motor is in need of repair)
Please Note: Any partitioning shown in the photographs are not included with this
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 3: Masterwood Model Teknomat 3000 CNC Machining Centre
Masterwood Model Teknomat 3000 CNC Machining Centre Single Spindle 5m x .33m Bed, 1.2m Ram Tavel Y Axis. S/No. 98070031 (1998)
Please Note: Any partitioning shown in the photographs are not included with this
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4: SCM T110i Tilting Spindle Moulder
SCM T110i Tilting Spindle Moulder with Steff 2034 Feed Unit, 2.4m x 400mm Table, Spindle Speeds: 3,000 - 10,000rpm. S/No. AB/164480 (2004)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 5: SCM T110i Tilting Spindle Moulder
SCM T110i Tilting Spindle Moulder with Bursgreen PF Unit, 1m x 750m Table, Spindle Speeds: 3,000 - 10,000rpm. S/No. AB/134526 (2000)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 6: SCM T110i Tilting Spindle Moulder
SCM T110i Tilting Spindle Moulder with Steff 2034 Feed Unit, Spindle Speeds: 3,000 - 10,000rpm, 1m x 700mm Table. S/No. AB/12737 (1999)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 7: SCM T130P Spindle Moulder
SCM T130P Spindle Moulder with Samco Feed Unit, 1200mm x 720mm Table, Spindle Speeds: 3,000 - 10,000rpm. S/No. AB 39951 (2004)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 8: SCM T130 Spindle Moulder
SCM T130P Spindle Moulder with Steff 2038 Feed Unit, 1200mm x 720mm Table, Spindle Speeds: 3,000 - 10,000rpm. S/No. AB16258 (1998)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 9: SCM T150 Class Spindle Moulder
SCM T150 Class Spindle Moulder with Steff 2038 Feed Unit, 1200mm x 720mm Table, Spindle Speeds: 3,250 - 10,000rpm. S/No. AB/105477 (1996)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 10: SCM Model Sandya 7 Wide Belt Sander
SCM Model Sandya 7 Wide Belt Sander, 1.1m Belt Width, S/No. AE/024681 (2003)
Please Note: These Items are located in Norwich. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.