2556 - Engineering and Fabrication Machinery for Sale on Behalf of Retained Clients
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Lot 13 is located in Gateshead, Newcastle upon Tyne, has been dismantled for loading and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 29 is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 31 is located in Accrington, unfortunately there are no loading facilities on-site. Blocking and Securing will be at the cost of the purchaser. This lot must be removed from site by 8th February 2017.
Please Note: All other lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 75
Lot 21: MYFORD SUPER SEVEN Centre Lathe
MYFORD SUPER SEVEN Centre Lathe, Swing Over Bed 7", Distance Between Centres 20", Spindle Bore 5/8", Speeds 25 - 2150rpm, With 3 Jaw Chuck, 4 Jaw Chuck, Collet Set, Cabinet Stand.
Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 22: BRIDGEPORT CNC Vertical Milling Machine
BRIDGEPORT CNC Vertical Milling Machine, Series 2 Interact 4, 3 Axis, Table 38" x 15", Spindle Taper 40 ISO, Throat 17", Heidenhain TNC 155 Control.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 23: SEMCO Turret Milling Machine Type LC-20VS
SEMCO Turret Milling Machine Type LC-20VS, Table Size 51" x 10", Cross Traverse 33", Spindle Taper 40 INT, Spindle Speeds 50 to 3750rpm.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 24: KRV2000 Turret Milling Machine
KRV2000 Turret Milling Machine, Variable Speed Head, Table Size 48" x 10", Spindle Taper R8, Spindle Speeds 60 to 4200rpm, Power Feed To Table Longitudinal, Comes with Mitutoyo 3 Axis Digital Readout.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 25: BRIDGEPORT Turret Mill Model BR2J2
BRIDGEPORT Turret Mill Model BR2J2, 2HP Variable Speed Head, Speeds Up To 3750rpm, Table Size 48" x 9", Power Feed To Table X Axis, 2 Axis Heidenhain DRO.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 26: XYZ TYPE 1500 Turret Milling Machine
XYZ TYPE 1500 Turret Milling Machine, Variable Speed Head, Table Size 42" x 9", Spindle Taper R8, Spindle Speeds 60 to 4200rpm, Power Feed to Table X Axis Only, 2 Axis DRO.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 27: ELGA Turret Milling Machine
ELGA Turret Milling Machine, Table Size 43" x 10", Spindle Taper 40ISO, Spindle Speeds 70 to 2300rpm, Power Feed To Table X Axis, 1.7kw Motor.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 28: KEARNEY TRECKER Universal Milling Machine Type No. 2CE
KEARNEY TRECKER Universal Milling Machine Type No. 2CE, Table Size 52" x 12", Spindle Taper 40ISO, Spindle Speeds 25 to 1300rpm with Slotting Attachment and Vertical Head, Plus Horizontal Arbor & Supports.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 29: Ward No.8 Combination Lathe
Ward No.8 Combination Lathe, Swing Over Bed 495mm, Maximum Working Length 1410mm, Spindle Bore 95mm with Tooling
Please Note: This Lot is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 30: Gate Giewont Vertical Milling Machine No3 FYA 32mm
Gate Giewont No3 FYA 32mm Vertical Milling Machine, Table Size 63" x 12", Throat Size 15", Spindle Taper 50INT, Spindle Speeds 20 to 1500rpm, Pendant Control.
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.