2556 - Engineering and Fabrication Machinery for Sale on Behalf of Retained Clients
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: Lot 13 is located in Gateshead, Newcastle upon Tyne, has been dismantled for loading and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 29 is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 31 is located in Accrington, unfortunately there are no loading facilities on-site. Blocking and Securing will be at the cost of the purchaser. This lot must be removed from site by 8th February 2017.
Please Note: All other lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 75
Los 11: WEBSTER BENNETT Vertical Boring Machine Type 36DH
WEBSTER BENNETT Vertical Boring Machine Type 36DH, Chuck Diameter 36", Max Swing 42", Daylight 19", Speeds 9 to 200rpm.
Please Note: This lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 12: WEBSTER BENNETT 48" DH Vertical Boring Machine.
WEBSTER BENNETT 48" DH Vertical Boring Machine, Table Size 54", Max Swing 57", Height Under Rail 24", Table Speed 4.5 to 100rpm
Please Note: This lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 13: Bronx Model PPU Double Pinch Bending Rolls
Bronx Model PPU Double Pinch Bending Rolls, Maximum Width, 3700mm (12 feet), Roll Diameter, 585mm (23"), Pre Bending and Rolling Thickness, 30mm (1 & 1/4"), Rolling Only Thickness, 40mm (1 5/8"), Rolling Speed 15 feet per minute (approx), Hydraulic Drop End, Main drive Motor 75 HP, Adjustment Motors 25 HP, (weight approx. 53 ton)
Please Note, This Lot is located in Gateshead, Newcastle Upon Tyne. This lot has been dismantled for loading and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 14: Tee Slotted Welding Table
Tee Slotted Welding Table, 21' (252") x 7' (84") x 2' (24") High, Approx Weight 20 Tons
Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 15: WEISSER-HEILBRONN TYPE JUNIOR Gap Bed Centre Lathe
WEISSER-HEILBRONN TYPE JUNIOR Gap Bed Centre Lathe, Swing Over Bed 460mm, Swing In Gap 650mm, Distance Between Centres 1600mm, Spindle Bore 43mm, Spindle Speeds 11.2 to 1000rpm, 2 Axis DRO, EX University.
Please Note: This lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 16: HARDINGE SUPER PRECISION Toolroom Centre Lathe
HARDINGE SUPER PRECISION Toolroom Centre Lathe, TYPE KL1, Swing Over Bed 11", Distance Between Centres 16", Spindle Speeds Variable 125 to 3000rpm, Imperial Gearbox with Collet Chuck & Collets, 3 & 4 Jaw Chucks, Quick Change Tool Post & Holders.
Please Note: This lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 17: COLCHESTER MASTER 2500 Gap Bed Centre Lathe
COLCHESTER MASTER 2500 Gap Bed Centre Lathe, Swing Over Bed 13", Swing In Gap 18", Distance Between Centres 40", Spindle Bore 1 5/8", Spindle Speeds 30 to 2500rpm with 3 Jaw Chuck, Drive Plate, Taper Turning, 2 Point Steady, Quick Change Tool Post.
Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 18: XYZ 1400 Gap Bed Centre Lathe
XYZ 1400 Gap Bed Centre Lathe, Swing Over Bed 14", Swing In Gap 18", Distance Between Centres 36", Spindle Bore 1 1/2", Spindle Speeds 63 to 2500rpm.
Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 19: MYFORD 254S Centre Lathe
MYFORD 254S Centre Lathe, Swing Over Bed 10", Distance Between Centres 30", Spindle Speeds 53-2000rpm, Screwcutting with Gearbox, 3 Jaw Chuck, Coolant, 3 Phase.
Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 20: HERBERT 4 SENIOR PREOPTIVE MONOSLIDE Turret Lathe
HERBERT 4 SENIOR PREOPTIVE MONOSLIDE Turret Lathe, Maximum Swing Under Bar, 15 1/2" Diameter, Maximum Swing Over Cross Slide, 8" Diameter, Spindle Bore 2 1/8", Spindle Speeds 32 to 1500rpm, Max Distance From Spindle To Capstan 33", Power Feed To Turret, With Collet Chuck, 3 Jaw Chuck, Turret Tools.
Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.