2537 - CNC Machining and Turning Centres formerly used by Jakta Metal AS & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Lot 1, 2, and 3 are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 4 is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-4 de 4
Lot 1: Mazak Quick Turn Nexus 250 MSY CNC Turning Centre
Mazak Quick Turn Nexus 250 MSY CNC Turning Centre with Mazatrol 640T Control System, Axis travels X 230mm Z 575mm W 585mm C 360 degrees (0.0001), Rapid Feedrates 30m/min, Maximum Spindle Speed Main 4000rpm, Sub Spindle 6000rpm, Milling Speeds 25-4500rpm. Spindle Bore 75mm, 12 Station Turret all of which can be driven, Fitted with Kitagawa B210 3 Jaw Chuck on Main Spindle, Kitagawa B206 3 Jaw Chuck on Sub Spindle, Tool Presetter, Swarf Conveyor, CE marked, S/No 190910 (2006)
Please Note: All lots are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 2: Mazak Quick Turn Nexus 350 II MY CNC Turning Centre
Mazak Quick Turn Nexus 350 II MY CNC Turning Centre with Mazatrol Matrix Control System Axis travels X 260mm Y 150mm Z 1600mm C 360 degrees (0.0001), 102mm through Spindle Bore, Maximum swing 750mm, Maximum Spindle Speed 3300rpm, Maximum Driven Tool Speed 4000rpm, Distance between Centres 1600mm, 12 Station Turret of which all can be driven, Fitted with Kitagawa 3 Jaw 12” Chuck, Programmable SMW 3 Point Steady 22-150mm Capacity, Programmable Tailstock, Tool Presetter, Swarf Conveyor, CE Marked, S/No. 194820 (2007)
Please Note: All lots are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 3: Mazak Quick Turn Nexus 100 II MS CNC Turning Centre
Mazak Quick Turn Nexus 100 II MS CNC Turning Centre with Mazatrol Matrix Control System, Axis travels X 185mm Z 450mm W 460mm C 360 dergrees (0.0001), Rapid Feed Rates 30m/min, Maximum Spindle Speeds 6000rpm (main and sub spindle), Milling Spindle Speeds 25-4500rpm, Spindle Bore 42mm, 12 Station Turret all of which can be driven, Fitted with Collet Chuck on main Spindle, 6” 3 Jaw Chuck on Sub Spindle, Tool Presetter, Swarf Conveyor, Parts Catcher, Symco RS565 Barfeed, CE Marked, S/No. 192999 (2007)
Please Note: All lots are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 4: Mazak VCN 510C-II CNC Vertical Machining Centre
Mazak VCN 510C-II CNC Vertical Machining Centre with Mazatrol Matrix Control System, Axis travels X 1050mm Y 510mm Z 513mm, 4th axis 360 Degrees (0.0001), Rapid Feed Rates 40m/min, Maximum Spindle Speed 12000rpm, MAS BT40 Spindle Taper, 30 Station ATC, Maximum weight on Table 1200kg, with Kitagawa 4th axis and Tailstock, Swarf Conveyor, S/No. 94719 (2007)
Please Note: All lots are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.