2533 - Bystronic CNC Laser Cutting System, Plasma Cutter, Guillotine, Press Brakes and other Fabrication Equipment

Engineering

Auktion beendet am

2016-10-05 15:00:00.0

Verbleibende Zeit

Auktion beendet

Artikelbeschreibung

Please Note: Lot 1 is located in Nottingham, Midlands. There are no loading facilities for this item. Blocking and securing however will be at the cost of the purchaser.

Please Note: Lot 2 is located in Motherwell, Scotland and will be loaded free of charge. Blocking and securing however will be at the cost of the purchaser.

Please Note: Lot 3, 4, 4A, 6, 7, 8, 9, are located in Chesterfield, Derbyshire and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Please Note: Lot 5 is located in Knowsley, Merseyside and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Please Note: Lot 10, 11, 12, 13, 16 & 17 are located in Chesterfield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Käuferprovision

Es gilt ein Aufgeld von 16.00 %.

Mehrwertsteuer

Zzgl. Mehrwertsteuer in Höhe von 20.00 %.

Seitenaufrufe

Viewing is available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

Der Käufer ist auf seine Kosten für das Abklemmen, Abbauen und Entfernen der gekauften Gegenstände vom Versteigerungsort verantwortlich. Beabsichtigt der Käufer, bei der Auktion erworbene Gegenstände zu exportieren, ist er auf eigene Kosten dafür verantwortlich, die Einhaltung aller britischen Exportbedingungen und den Erhalt aller anwendbaren Ausfuhrlizenzen sicherzustellen

Bitte markieren Sie das nachfolgende Kästchen und klicken Sie auf ”Bestätigen“.


* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.

Hinweis für die Käufer

Datum der letzten Zahlung

2016-10-07 17:00:00.0

Endgültiges Freigabedatum

2016-10-20 17:00:00.0

Versandunternehmen

Lagerfirma

Details zum Exportieren/Importieren aus Großbritannien

Lose 11-19 von 19

Die Gebote werden für einzelne Lose verlängert, wenn Gebote innerhalb von 10 Minuten nach der Endzeit des Artikels abgegeben werden.
Preview image
Endet:
05 Okt 2016 15:30:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 9: Geka Hydracrop 110A

Geka Hydracrop 110A, 110 Ton Hydraulic Universal Steel Worker, Dual Operator Foot Pedal Control, Punching 40 x 20mm, 28 x 28mm, Notch 90 x 52 x 13mm, Angle Shear 152 x 152 x 15mm, Flats Shear 600 x 15mm, 400 x 20mm, Bar Cropper 50mm Rounds/Squares with Electric Length Stop (2003)

Please Note: This Item is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

 

 

Preview image
Endet:
05 Okt 2016 15:40:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 10: KINGSLAND Model 115XS, 115 Ton Hydraulic Universal Steelworker

KINGSLAND Model 115XS, 115 Ton Hydraulic Universal Steelworker, Capacities - Punching 34mm thru 26mm plate or 55mm thru 16mm, Flat Shear 380mm x 25mm or 600mm x 15mm, Angles 150mm x 18mm at 90 degrees.,55mm Round Bar, 50mm Square Bar, Including Length Stop, S/No. 982998 

Please Note: This Item is located in Chesterfield, Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Preview image
Endet:
05 Okt 2016 15:40:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 11: BPR Model Z302 Mechanical Pyramid Section Bending Rolls

BPR Model Z302 Mechanical Pyramid Section Bending Rolls, 35 x 35 x 4 mm Angles, Capacities: 50mm x 8mm Flats on Edge at 350mm Dia, 80 x 12mm Flats on Flat at 350mm Dia, 40 x 40 x 2mm Wall Box Section at 800mm Dia, 2 Rolls driven, Horizontal/Vertical Working Position

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Preview image
Endet:
05 Okt 2016 15:10:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 12: AMADA Model CSW – 200 x 200 x 3.2mm Fixed Angle Corner Notcher

AMADA Model CSW – 200 x 200 x 3.2mm Fixed Angle Corner Notcher with 1050mm x 800mm Table Including Guides, 100mm x 50mm Rear Station Edge Notcher with 950mm x 430mm Table Including Guides, S/No 561698.

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Preview image
Endet:
05 Okt 2016 15:30:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 13: Comac 200 x 200 x 3.5mm Fixed Angle Corner Notcher

Comac 200 x 200 x 3.5mm Fixed Angle Corner Notcher

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Preview image
Endet:
05 Okt 2016 15:10:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 14: Startrite 314 500mm Throat Vertical Bandsaw

Startrite 314  500mm Throat Vertical Bandsaw, Table Size 520 x 520mm, Variable Cutting Speeds

Please Note: This Item is located in Chesterfield, Derbyshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

 

 

Preview image
Endet:
05 Okt 2016 15:20:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 15: SJ 6ft x 4ft Granite Table on Adjustable Frame

SJ 6ft x 4ft Granite Table on Adjustable Frame

Please Note: This Item is located in Chesterfield, Derbyshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

 

 

Preview image
Endet:
05 Okt 2016 15:50:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 16: BEKA-MAK BMSY 550 Twin Column Heavy Duty Horizontal Bandsaw

BEKA-MAK BMSY 550 Twin Column Heavy Duty Horizontal Bandsaw, Rounds/Squares Capacities 550mm, Rectangles 570mm x 450mm, Swivel Vice, Coolant, (2004)

Please Note: This Item is located in Chesterfield, Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Preview image
Endet:
05 Okt 2016 15:40:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 17: ASQUITH OD1 6ft Arm Radial Drilling Machine

ASQUITH OD1 6ft Arm Radial Drilling Machine. Including Box Table, Chuck Guard & Jet Brake. Speeds 31-830 Rpm. 3MT Spindle.

Please Note: This Item is located in Chesterfield, Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Kategorien