2528 - Gear Machinery and Workshop Equipment no longer required by a Glasgow based Manufacturing Facility
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These Items are located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 95
Lot 21: Churchill GS8 Universal 8” Gear Shaver
Churchill GS8 Universal 8” Gear Shaver, Max Pitch: 6-17.5 MOD/4-16DP, Max Length BC: 568mm/22”, Max Face Width: 76.2mm/ 3”, Crowning, Taper setting, Magnetic Clarifier, S/No. 2756699
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 22: Churchill GS8 Universal 8” Gear Shaver
Churchill GS8 Universal 8” Gear Shaver, Max Pitch: 6-17.5 MOD/4-16DP, Max Length BC: 568mm / 22”, Max Face Width: 76.2mm/ 3”, Crowning, Taper setting, Magnetic Clarifier, S/No. 2766684
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 23: Churchill GS8 Universal 8” Gear Shaver
Churchill GS8 Universal 8” Gear Shaver, Max Pitch: 6-17.5 MOD/4-16DP, Max Length, BC: 568mm/22”, Max Face Width: 76.2mm/ 3”, Crowning, Taper setting, Magnetic Clarifier, S/No. 27596910
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 24: Churchill GS8 Universal 8” Gear Shaver
Churchill GS8 Universal 8” Gear Shaver, Max Pitch: 6-17.5 MOD/4-16DP, Max Length BC: 568mm / 22”, Max Face Width: 76.2mm/ 3”, Crowning, Taper setting, Magnetic Clarifier, S/No. 2885729
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 25: Hey No.18 Twin Spindle Gear Deburring Machine
Hey No.18 Twin Spindle Gear Deburring Machine, Max Gear Dia: 460mm /18” Max Work length: 305mm / 12”, Max No Teeth: 160, Max Chamfering Rate: 260 teeth per minute, Clamping, Auto Cycles, S/No. 2836-54
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 26: Hey No.18 Twin Spindle Gear Deburring Machine
Hey No.18 Twin Spindle Gear Deburring Machine, Max Gear Dia: 460mm /18” Max Work length: 305mm / 12”, Max No Teeth: 160, Max Chamfering Rate: 260 teeth per minute, Clamping, Auto Cycles, S/No. 2838-54
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 27: Hey No.18 Twin Spindle Gear Deburring Machine
Hey No.18 Twin Spindle Gear Deburring Machine, Max Gear Dia: 460mm /18” Max Work length: 305mm / 12”, Max No Teeth: 160, Max Chamfering Rate: 260 teeth per minute, Clamping, Auto Cycles, S/No. 2838-63
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 28: Hey No.10 Gear Tooth Rounding, Pointing Chamfering Machine
Hey No.10 Gear Tooth Rounding, Pointing Chamfering Machine, Max Work Dia: 250mm/10”, Max Work length: 150mm/ 8”, Max Pitch: 6 MOD/4DP, Cutter Speeds: 2000-3000, RPM, Single Point, Clamping, Coolant, S/No. 2814-548
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 29: Hey No.10 Gear Tooth Rounding, Pointing Chamfering Machine
Hey No.10 Gear Tooth Rounding, Pointing Chamfering Machine, Max Work Dia: 250mm /10”, Max Work length: 150mm / 8”, Max Pitch: 6 MOD/4DP, Cutter Speeds: 2000-3000 RPM, Twin Head Clamping, Coolant,
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 30: Hurth ZEA1 Gear Chamfering & Gear Deburring Machine
Hurth ZEA1 Gear Chamfering & Gear Deburring Machine, Max Wheel Dia: 175mm, Min Wheel Dia: 25mm, Max Module: 5, Gear Width: 360mm, Loader, Coolant, S/No. 42291
Please Note: This Item is located in Glasgow. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.