2525 - Large Capacity CNC & Conventional Machine Tools no longer required due to the Restructuring at The Cordell Group Ltd

Noble & Lund Heavy Duty Roll Lathe, Swing Over Bed 1371mm, Swing Over Cross Slide 1066mm, Maximum Distance Between Centres 3810mm, Spindle Speeds 1.5 – 85.6, Feeds Sliding 2 – 64CPI, surfacing 4 – 128CPI, Complete With 4 Jaw Chuck, 3 Way Tool Post, Rapid Power Traverse, Approximate Dimensions 7200 x 2700 x 2700mm, Approximate Weight 20,000kg, S/No.3870-G2

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Swift Gap Bed Centre Lathe, Model 16V5, Swing Over Bed 930mm, Swing Over Saddle 680mm, Swing In Gap 1560mm, Maximum Distance Between Centres 3050mm, Spindle Borer 105mm, Spindle Speeds 7.5 – 450rpm, Feeds Sliding 10 – 300 CPI, Surfacing 30 – 900 CPI, Tailstock Taper 6MT, Complete With 4 Jaw Chuck, 3 Point Fixed Steady, Rapid Power Traverse, Screw Cutting, Motor 20HP, Electrics 415v, 3ph, 50 Cycles, Approximate dimensions 5500 x 2100 x 1400mm, Approximate Weight 8500kg, S/No. 13108

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dean Smith & Grace Type 21 x 168 Straight Bed Lathe, Swing Over Bed 590mm, Swing Over Saddle 400mm, Maximum Distance Between Centres 4267mm, Spindle Bore 92mm, Spindle Speeds 10 – 800rpm, Feeds Sliding 0.0014 – 0.08 Inch Per Rev, Surfacing 0.0007 – 0.04 Inch Per Rev, Complete With 3 &4 Jaw Chucks, 3 3 Point Fixed Steadies, Travelling Steady, Cross Slide Drill Attachment, Rapid Power Traverse, Screw Cutting, Change Gears, Motor 15HP, Electrics 415v, 3ph, 50 Cycles, approximate Dimensions 7100 x 1650 x 1500mm, Approximate Weight 7500kg, S/No. 35434-10-64

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the ...

Colchester Mascot 1600 Gap Bed Centre Lathe, Swing Over Bed 450mm, Swing Over Cross Slide 270mm, Swing In Gap 760mm, Maximum Distance Between Centres 2032mm, Spindle Speeds 20 – 1600rpm, Feeds Sliding 0.6 – 1mm per rev, Surfacing 0.3 – 0.5mm per rev, Complete 3 Jaw Chuck Fixed Steady, Quick Change Tool Post, Lovo Light, Coolant, Screw Cutting, Motor 12.5HP, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 3450 x 1700 x 1500mm, Approximate Weight 2750kg, S/No. 7 0006 00327

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dean Smith & Grace Type 2112 x 50 Gap Bed Centre Lathe, Swing Over Bed 550mm, Swing Over Cross Slide 325mm, Swing in Gap 860mm, Maximum Distance Between Centres 1270mm, Spindle Bore 82mm, Spindle Speeds 8 – 900rpm, Feeds Sliding 0.005 – 1.6mm per rev, Surfacing 0.0025 – 0.8mm per rev, Complete with Hydraulic Copy, 2 Axis DRO, 3 &4 Jaw Chucks, Fixed Steady, Change Gears, Lovo Light, Coolant, Screw Cutting, Approximate Dimensions 3200 x 1800 x 1600mm, Approximate Weight 3500kg, S/No. 39109-8-72

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dean Smith & Grace Type 21 x 48 Gap Bed Centre Lathe, Swing Over Bed 590mm, Swing Over Saddle 380mm, Swing in Gap 920mm, Maximum distance Between Centres 1220mm, Spindle Bore 92mm, Spindle Speeds 5.3 – 600rpm, Feeds Sliding 0.0014 – 0.08 inch per rev, Surfacing 0.0007 – 0.04 inch per rev, Complete With 4 Jaw Chuck, Cross Sliding Drill Attachment, Lovo Light, Coolant, Motor 15HP, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 3700 x 1700 x 1500mm, Approximate Weight 4000kg, S/No. 31868-
7-57

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Bridgeport CNC Teach Lathe, Model ITL400, Fanuc 21i-T CNC Control, Swing Over Bed 410mm, Swing Over Saddle 250mm, Swing in Gap 610mm, Maximum Distance Between centres 1270mm, Spindle Speeds 2500rpm, Feeds 4m min, Spindle Motor 11kw, Complete With 4 Way Quick Change Tool Post, 3 & 4 Jaw Chucks, Lovo Light, Coolant, Interlock Guards, Approximate Dimensions 2900 x 1600 x 1700mm, Approximate Weight 1900kg, S/No.B70002

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Bridgeport VMC 800-22 CNC Vertical Machining Centre with Heidenhain 426CB CNC Control, Table 1000 x 490mm, X Traverse 800mm, Y Traverse 510mm, Z Traverse 500mm, Spindle Taper 40, Spindle Speeds 6000rpm, Feeds 6m min, Complete with 22 Position ATC, Telescopic Guards, Interlock Guards, Motor 11kw, Approximate Dimensions 2900 x 2300 x 3000mm, Approximate Weight 3600kg, S/No. 720687 (1997)

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Huron KU6 Universal Milling Machine, Table 2000 x 420mm, Long Traverse 1500, Cross Traverse 700mm, Vertical Traverse 470mm, Spindle Speeds 30 – 2066rpm, Spindle Taper 40 International, Feeds Long & Cross 1.6 – 820mm min, Vertical 0.8 – 410mm min, Complete with 3 Axis DRO, Lovo Light, Approximate Dimensions 2850 x 2100 x 1800mm, Approximate Weight 4500kg, S/No. 8132

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Richmond Envoy 4’ Radial Arm Drill, Spindle Speeds 40 – 1850rpm, Spindle Taper 5MT, Feeds 0.03 – 0.66mm Per Rev, Quill Traverse 300mm, Spindle To Base Maximum 1350mm, Complete with Safety Brake, Loose Box Table, Approximate Dimensions 2000 x 900 x 2400mm, Approximate Weight 2500kg

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.