2524 - Late and High Quality CNC Machine Tools no longer required due to Investment in New Technology by VTL Precision Group
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: All lots are located in Huddersfield, West
Yorkshire.
Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 31
Lot 1: Spinner Type U5-620 5-Axis Vertical Machining Centre
Spinner Type U5-620 5-Axis Vertical Machining Centre with Siemens 840D si Control System, Maximum Spindle speed 12,000 rpm, Din 40 Spindle Taper, Axis travels X 620mm Y 520mm Z 460mm B axis -5 to +110 degrees (0.001), C axis 360 (0.001) degrees, 32 Station, ATC, Table diameter 650mm, Through Spindle Coolant, Swarf Conveyor, Coolant Filtration System, OMF 1000 Fume Extraction with Renishaw Probe Interface and Probe, Power on Time 12159hrs, S/No. UT0521 (2014)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 2: Spinner Type U3-620 3-Axis Vertical Machining Centre
Spinner Type U3-620 3-Axis Vertical Machining Centre with Siemens 840D si Control System, Maximum Spindle speed 12,000 rpm, Din 40 Spindle Taper, Axis travels X 620mm Y 520mm Z 460mm, 32 Station ATC, Table dimensions 920mm x 540mm, Through Spindle Coolant, Swarf Conveyor, Coolant Filtration System, OMF 1000 Fume Extraction, Single Long Tool Facility in working area with Renishaw Probe Interface and Probe Renishaw Tool Presetter, Power on Time 10049hrs, S/No. UT 0520 (2014)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 3: Mikron Type UCP 600 5-Axis Vertical Machining Centre
Mikron Type UCP 600 5-Axis Vertical Machining Centre with Heidenhain iTNC530 Control System, Maximum Spindle speed 20,000rpm HSK A63 Spindle Taper, Axis travels X 600mm Y 530mm Z 530mm 4th 360 degrees 5th 220 degrees (+120 to -100) 30 Station ATC, Swarf Conveyor, Spindle Chiller Unit Coolant Chiller Unit, Blum Tool Presetter, Renishaw Probe Interface, Machine Hours Control on 69695hrs, Machine on 46276hrs Program run 12543hrs Drives on 37075hrs Spindle 13731hrs, S/No. 212.30.73.204 (10/2007) (Please Note: There is No Probe)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 5: Doosan Type DNM 400ii 4-Axis Vertical Machining Centre
Doosan Type DNM 400ii 4-Axis Vertical Machining Centre with
Fanuc i series Control System, Maximum Spindle Speed 12,000 rpm
BT40, Spindle Taper, axis travels X 764mm Y 437mm Z 512mm 4th 360
degrees, Rapid Feed rates X Y 36 M/min Z 30 M/min, 30 Station ATC,
Swarf Conveyor, Fume Extraction, Nikken 4th axis 200mm diameter
with Tail Stock,
Renishaw Laser Tool Presetter, S/No. MV0009-002428
(01/2014)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 6: Doosan DNM 400 4th Axis Vertical Machining Centre
Doosan DNM 400 4th Axis Vertical Machining Centre with Fanuc i series Control System, Maximum Spindle speed 12,000rpm, BT40 Spindle Taper, axis travels X 764mm Y 437mm Z 512mm 4th 360 degrees, Rapid Feed rates X Y 36 M/min Z 30 M/min, 30 Station ATC, Swarf Conveyor, Fume Extraction, Nikken 4th axis 200mm diameter with Tail Stock, Renishaw Laser Tool Presetter, S/No. DNM4000063 (09/2009)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 7: Yang SMV600 3 Axis Vertical Machining Centre
Yang SMV600 3 Axis Vertical Machining Centre with Fanuc O-MD Control System, Maximum Spindle speed 8000rpm, BT40 Spindle Taper, axis travels X 620mm Y 430mm Z 560mm, Table dimensions 750mm x 360mm, 20 Station ATC, S/No. 200842 (02/2002)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 8: Chiron FZ15W Vertical Machining Centre
Chiron FZ15W Vertical Machining Centre with Siemens 840D Control System, Twin Pallets fitted with Peiseler 4th axis, ISO 40 Spindle Taper, 20 Station Tool Changer, Knoll Coolant Filtration Unit and Swarf Conveyor, S/No. 149-92 (2007)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 9: Chiron FZ12W Twin Pallet Vertical Vertical Machining Centre
Chiron FZ12W Twin Pallet Vertical Machining Centre with GE Fanuc OM Control System, axis travels X 550mm Y 300mm Z 425mm, 12 Station Tool Changer, S/No. 181-52 (1995)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 10: Dahlih DL-DMV800 Twin Pallet 3 Axis Vertical Machining Centre
Dahlih DL-DMV800 Twin Pallet 3 Axis Vertical Machining Centre with Fanuc Oi MC Control System, Maximum Spindle speed 8000rpm, BT40 Spindle Taper, axis travels X 970mm Y 500mm Z 260mm, Rapid Feed rate X Y 30m/min Z 24m/min, Table dimensions 9009 x 600mm, 32 station ATC, Through Spindle Coolant, S/No. 3008010029 (03/2005)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Lot 11: Maho MH800W Machining Centre
Maho MH800W Machining Centre with Heidenhain 234 Control, Axis travels X 800mm Y 800mm Z 500mm, Vertical Head Manual movement 180 degrees (+ or – 90), Table dimensions 1100mm x 600mm, S/No. 082671
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.