2519 - CNC Lathes & Horizontal Machining Centres formerly used by CNC Speedwell & Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: Lots 300, 301, 302 & 303 are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lots 304, 305, 308, 309A & 309B are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lots 306, 307, 309, 310, 311, 312 & 313 are located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 16
Los 300: Toyoda FH 55S Twin Pallet 4-Axis Horizontal Machining Centre
Toyoda FH 55S Twin Pallet 4-Axis Horizontal Machining Centre with Fanuc 16i-m Control, Spindle maximum 6000rpm, Axis Travels: X = 750mm, Y = 750mm, Z = 600mm, B: 360/0.001 Degrees, Rapid Feed Rates: 36 m/min, Table Dimensions: 550 x 550mm, BT50 Spindle Taper, 40-Station ATC, Through Spindle Coolant, Swarf Conveyor and Fixture Clamping. S/No. NM-8964 (03/2000)
Please Note: There is a Renishaw Probe Interface but no Probe.
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 301: Toyoda FH 55S Twin Pallet 4-Axis Horizontal Machining Centre
Toyoda FH 55S Twin Pallet 4-Axis Horizontal Machining Centre with Fanuc 16i-m Control, Spindle maximum 6000rpm, Axis Travels: X = 750mm, Y = 750mm, Z = 600mm, B: 360/0.001 Degrees, Rapid Feed Rates: 36 m/min, Table Dimensions: 550 x 550mm, BT50 Spindle Taper, 40-Station ATC, Through Spindle Coolant, Swarf Conveyor and Fixture Clamping. S/No. NM-9721 (03/2002)
Please Note: There is a Renishaw Probe Interface but no Probe.
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 302: Okuma MX-50HB Twin Pallet Horizontal Machining Centre
Okuma MX-50HB Twin Pallet Horizontal Machining Centre with OSP7000M Control, BT50 Spindle, Full 'B' Axis, 40ATC, Twin 500mm x 500mm Pallets, Swarf Conveyor. S/No. 0154 (1998)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 303: Goratu GHT4 – 4000 CNC Lathe
Goratu GHT4 – 4000 CNC Lathe with Siemens 810 Control, 720mm Swing x 4000mm between centres, 500mm Manual 3-Jaw Chuck, (1) 3-Point Steady, 8-Station Turret, Tailstock. S/No. 14004 (2002)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 304: Mazak Nexus 200 CNC Turning Centre with Fusion 640T Control
Mazak Nexus 200 CNC Turning Centre with Fusion 640T Control, Kitigawa BB208 Chuck, Toolsetter, Parts Catcher, Tailstock, ACS Filtermist, Swarf Conveyor. Control Options: Background Path Check, Synchro Main Spindle Tapping. Servo Hours 22,568. S/No. 160602 (2003)
Please Note: These Items are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 305: Hyundai HIT-18F CNC Lathe
Hyundai HIT-18F CNC Lathe with Fanuc Series O-T Control, 10" 3 Jaw Chuck, 8 Station ATC, Tooleye, Tail Stock, Swarf Conveyor, Parts Catcher, S/No. 34198001
Please Note: This item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 306: Colchester Tornado 100 CNC Lathe
Colchester Tornado 100 CNC Lathe with GE Fanuc OT Control, Collet Chuck and Collets, Swarf Conveyor, Tailstock 4,000rpm & Multifeed ML1 Short Barfeed.
Please Note: This Item is located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 307: Hitachi Seiki HT20 CNC Lathe
Hitachi Seiki HT20 CNC Lathe with Fanuc 21T control & 3-Jaw Power Chuck (1995).
Please Note: This Item is located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 308: Bridgeport VMC 10022 Machining Centre
Bridgeport VMC 10022 Machining Centre with Heidenhain TNC 370 Control, Table size 1150mm x 490mm, 22 Station ATC, S/No. 721930 (1998)
Please Note: This item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 309: Hurco BMC 30HT/M Vertical Machining Centre
Hurco BMC 30HT/M Vertical Machining Centre, X = 762mm, Y = 457mm, Z = 609mm, 24-Station ATC.
Please Note: This Item is located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser