2506 - High Quality Fabrication Equipment previously used by Car Mec S.r.L, Italy in the Manufacture of Elevators
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
These Items are located in Malnate (VA), Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 11-20 z 90
Przedmiot 9: BBM Model PM Type 55LT 55 Ton Punching Machine
BBM Model PM Type 55LT 55 Ton Punching Machine, No. 360674 (2006) throat depth 510mm, table size 700mm x 700mm.
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Przedmiot 10: Schiavi HFB 220/4 CNC Press Brake
Schiavi HFB 220/4 CNC Press Brake with Mind 3 Task 84 Control, S/No 091-8035 (2000) maximum pressure 220 Ton, maximum bending length 4280mm, Throat depth 410mm, Open height 450mm.
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 11: Tooling for Schiavi HFB 220/4 Press Brake
Tooling for Schiavi HFB 220/4 Press Brake
Please Note: The cart shown is not included.
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lot 10 & 11
Lot 10 - Schiavi HFB 220/4 CNC Press Brake with Mind 3 Task 84 Control, S/No 091-8035 (2000) maximum pressure 220 Ton, maximum bending length 4280mm, Throat depth 410mm, Open height 450mm
Lot 11 - Tooling for Schiavi HFB 220/4 Press Brake.
Please Note: These Items are located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
10 | Schiavi HFB 220/4 CNC Press Brake |
11 | Tooling for Schiavi HFB 220/4 Press Brake |
Przedmiot 13: I.M.A.L Model Daily Type 100/33 CNC Press Brake
I.M.A.L Model Daily Type 100/33 CNC Press Brake with Delem DA-65W Control, S/No. 025158 (2005) maximum pressure 100 Ton, maximum bending length 3300mm, throat depth 300mm, open height 410mm
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 14: Tooling for I.M.A.L Press Brake
Tooling for I.M.A.L Press Brake
Please Note: The cart shown is not included.
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 13 & 14
Lot 13 - I.M.A.L Model Daily Type 100/33 CNC Press Brake with Delem DA-65W Control, S/No. 025158 (2005) maximum pressure 100 Ton, maximum bending length 3300mm, throat depth 300mm, open height 410mm
Lot 14 - Tooling for I.M.A.L Press Brake.
Please Note: These Items are located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
13 | I.M.A.L Model Daily Type 100/33 CNC Press Brake |
14 | Tooling for I.M.A.L Press Brake |
Przedmiot 16: Schiavi RG80 25 CNC Press Brake
Schiavi RG80 25 CNC Press Brake with Schiavi Task 84 Control, S/No. 78-5127 (1989) maximum working pressure 80 Ton, maximum bending length 2500mm
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Przedmiot 16A: Extension Blocks
Extension Blocks
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Przedmiot 16B: Qty of Press Brake Tooling
Qty of Press Brake Tooling
Please Note: This Item is located in Malnate (VA), Italy, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser