2481 – CNC Lathes & Machining Centres no longer required by i-Tek Engineering Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in Irvine, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-6 von 6
Los 1: Mazak Integrex E Tower E410H II x 3000 Millturn CNC Lathe with Mazatrol Matrix Control
Mazak Integrex E Tower E410H II x 3000 Millturn CNC Lathe with
Mazatrol Matrix Control, S/No. 200783
(2007) 40 Station ATC, 400mm dia SMW Chuck, Tailstock, Swarf
Conveyor, SMW SLU4 - 245mm Capacity Hydraulic Steady, Max Machining
Dia 610mm, Max Machining Length 3000mm, Main Spindle 4000rpm,
Spindle Motor 26kw, Rotary Tool Spindle Speeds 12,000rpm, Rotary
Tool Motor 22kw, Capto C6, Y Axis Travel 410mm, C Axis Main Spindle
& B Axis – 30 + 210 Degrees Positioning Turret, Weight 20,500
kgs
Please Note: This Item is Located in Irvine, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 2: Mazak Nexus HCN 6800-II Twin Pallet Horizontal Machining Centre with Matrix CNC Control
Mazak Nexus HCN 6800-II Twin Pallet Horizontal Machining Centre with Matrix CNC Control, S/No. 203558 (2007), Pallet Size 630mm x 630mm, 1 Degree Indexing, 43 Station ATC, CAT 50 Spindle Taper, Maximum Spindle Speed 10,000 rpm, 37 kw Spindle Motor, Axis Travels X = 1050mm, Y =1050mm, Z = 980mm, 70 Bar Hi-Pressure Coolant System Consep 2000, Swarf Conveyer, Weight 19,000 kgs
Please Note: This Item is Located in Irvine, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 3: Mazak Quick Turn Smart 350 CNC Lathe with Mazatrol CNC Smart Control
Mazak Quick Turn Smart 350 CNC Lathe with Mazatrol CNC Smart Control. S/No. 256058 (2014) (Installed 2015), 12 Station Turret, 15” dia Kitagawa Chuck, Spindle Bore 102mm, Tool Eye, Tailstock, Swarf Conveyer, Maximum Turning Dia 420mm, Maximum Turning Length 1233mm, Spindle Speeds 3,300 rpm Spindle Motor 30 kw, Weight 6760 kgs
Please Note: This Item is Located in Irvine, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4: Mazak Variaxis 730-5X Twin Pallet Vertical Machining Centre with Mazatrol 640M- 5X CNC Control
Mazak Variaxis 730-5X Twin Pallet Vertical Machining Centre with Mazatrol 640M - 5X CNC Control, S/No. 175468 (2005), Pallets 500mm x 500mm, 80 Station ATC, CAT 50 Spindle Taper, Spindle Speeds 12,000 rpm, Thru Spindle Coolant, Hi-Pressure Coolant System 70 Bar, Swarf Conveyer, Axis Travels X = 730mm, Y = 850mm, Z = 560mm, Table Tilt + 30 – 120 Degree, Full C Axis Rotation, Weight 22,000 kgs.
Please Note: This Item is Located in Irvine, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 5: Mazak Quick Turn Nexus 450-IIM Driven Tool CNC Lathe
Mazak Quick Turn Nexus 450-IIM Driven Tool CNC Lathe with Mazatrol Matrix Nexus 2 Control, Max. Machining Diameter: 580mm, Max. Machining Length: 2075mm, 2000mm between Centres, Spindle Bore: 165mm, fitted with ‘C’ Axis, Driven Tool Facility, 450mm diameter Hydraulic Chuck, Tooleye, SMW SLU4 Hydraulic Steady Rest & Chip Conveyor. (2014 – Installed 2015)
Please Note: This Item is located in Irvine, Scotland
Los 6: Qty Tooling - suitable for Mazak Quick Turn 450-IIM
Qty Tooling - suitable for Mazak Quick Turn 450-IIM
Please Note: This Item is located in Irvine, Scotland