2462 - CNC Conventional & Fabrication Equipment no longer required due to the reorganisation at Dunham Manufacturing Co Ltd, Skelmersdale and Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located at Chesterfield, Halifax, Haslingden, Hyde and Knowsley. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 19
Lot 1: HAAS VF-3 Machining Centre
HAAS VF-3 Machining Centre with HAAS Control, Table Size 4 ft x
18”, 20-Station ATC, BT 40 Tooling with Tooling, S/No. 4093 (1994)
Please Note: This Item is located at Chesterfield and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 2: HAAS 4th Axis Unit
HAAS 4th Axis Unit, 12” Chuck Size
Please Note: This Item is Located at Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 3: Tower Unit with Kurt Vices
Tower Unit with Kurt Vices
Please Note: This Item is located in Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 4: Combination Bid to Include Lots 1 - 3
HAAS VF -3 Machining Centre with HAAS Control, Table Size 4 ft x 18”, 20-Station ATC, BT 40 Tooling with Tooling, S/No. 4093 (1994) And HAAS 4th Axis Unit, 12” Chuck Size, Tower Unit with Kurt Vices
Please Note: These Items are located in Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
1 | HAAS VF-3 Machining Centre |
2 | HAAS 4th Axis Unit |
3 | Tower Unit with Kurt Vices |
Lot 5: Ajax Victor VTurn 20 CNC Lathe
Ajax Victor VTurn 20 CNC Lathe with Fanuc Series O-T Control, 8” Chuck, 10 Station Turret, Tooleye, Tailstock, Swarf Conveyor with Multisam 6.80 Barfeed, S/No. MA2143 (1995)
Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight
Lot 6: Ajax Victor VTurn 26 CNC Lathe
Ajax Victor VTurn 26 CNC Lathe with Fanuc Series O-T Control, 10 Station Turret, 10” Chuck, Tailstock with Swarf Conveyor, S/No. UC1738
Please note: This item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight
Lot 7: Ajax Victor TNS-5 CNC Lathe
Ajax Victor TNS-5 CNC Lathe with Fanuc Series O-T Control, 12 Station Turret, 12” Chuck, Tailstock with Swarf Conveyor. S/No. FG - 1274 (1989)
Please Note: This Item is located at Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lot 8: Harrison M500 Gap Bed Centre Lathe
Harrison M500 Gap Bed Centre Lathe, 60” Between Centres with 4-Jaw Chuck and Fixed Steady.
Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight
Lot 9: Finnpower F5s 30 Ton Capacity CNC Turret Punch Press
Finnpower F5s 30 Ton Capacity CNC Turret Punch Press with
Siemens Sinumerik Control, 22-Station Turret With 6 Auto Index
Stations, Working Area 2500 X 1250 mm without repositioning, Max
Hole Diameter 88.9 mm, Tooling in Turret. S/No. 11.0-F525145601
(2001)
Please Note: This Item is located in Haslingden, Lancashire
and will be loaded to a suitable vehicle free of charge however
blocking and securing will be at the cost of the
purchaser.
Lot 10: Kingsland Ts3006 3050 x 6 mm Mild Steel Hydraulic Guillotine Shear
Kingsland Ts3006 3050 x 6 mm Mild Steel Hydraulic Guillotine Shear, Power Back Gauge (Touch and Go System Needs Attention), Blade Gap Adjustment, 2 Front Supports LH Squaring Arm, Rear Photocell Safety Guards, Foot Pedal Control (2005)
Please Note: This Item is located in Halifax and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser