2448 - CNC Wire Eroders, Spark Eroder and Die Sinker, CNC Machining Centres, Conventional Machine Tools and CM1000 Sand Blasting Machine No Longer Required by Eroga Die Co Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in Gloucestershire. Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 17th December 2015
And then from:-
4th January 2016 to 14th January 2016
(There will be no clearance on site between 18th December 2015 and 3rd January 2016 inclusive)
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 19
Los 1: Charmilles Robo-Form Type 31 CNC EDM Die Sink
Charmilles Robo-Form Type 31 CNC EDM Die Sink. S/No. 75537/635168 (1998)
Please Note: This Item is located in Gloucester, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser
Los 2: Charmilles Robofil 290 CNC Wire Eroder
Charmilles Robofil 290 CNC Wire Eroder. S/No. 7.2618/330792
(1998)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 3: Charmilles Robofil 500/310 CNC Wire Eroder
Charmilles Robofil 500/310 CNC Wire Eroder. S/No. 6.2464/355053
(1996)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 4: Charmilles Robofil 310 CNC Wire Eroder
Charmilles Robofil 310 CNC Wire Eroder. S/No. 350 198 (1992)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 5: Joemars Eurospark Model JMNC43A Spark Eroder.
Joemars Eurospark Model JMNC43A Spark Eroder. S/No. 9071499 with
P75 Power Supply and D43A Fluid System, 1100mm x 550mm x 300mm
Tank, 650mm x 400mm Table.
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 6: GEE EDM 500 Spark Eroder
GEE EDM 500 Spark Eroder, 600mm diameter Table, Vectorsparc
Control, Anilam Wizard, 2 Axis DRO. S/No. 108802
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 7: Leadwell V-30i Vertical Machining Centre
Leadwell V-30i Vertical Machining Centre with Series Fanuc 01-MC
Control. S/No. L2T JH0017 (2008), Table Size 890mm x 500mm, 8,000
RPM Spindle, 24-Station ATC with Swarf Conveyor, BT40 Tooling with
Table Mounted Tool Sensor.
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 8: Leadwell V30 Vertical Machining Centre
Leadwell V30 Vertical Machining Centre with Mitsubishi Control,
Swarf Filtration System, Table Size 890mm x 400mm, 24-Station ATC,
BT40 Tooling. S/No. L2TJJ0532 (2000)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 9: Leadwell V40 Vertical Machining Centre
Leadwell V40 Vertical Machining Centre with Mitsubishi Control.
S/No. LISIH0042 (2000), Table Size 1200mm x 500mm, 20-Station ATC,
BT40 Tooling. (1998)
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser
Los 10: Leadwell VMC 25 Vertical Machining Centre
Leadwell VMC 25 Vertical Machining Centre. S/No. LISID0082 (1994), Table Size 850mm x 400mm, 20-Station ATC, Mitsubishi CNC Control, BT40 Tooling.
Please Note: This Item is for Spares & Repairs
Only
Please Note: This Item is located in Gloucester,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser