2445 - CNC Lathes & Machining Centre, Conventional Milling & Turning Machines including Oil Country & Facing Lathes, Vertical & Horizontal Borers, Grinders and other associated Machines
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location:- These Items are located in Burntwood and Tamworth. Please see individual lots for loading information.
Clearance Dates :-
Due to the Christmas break the removal dates for these items
will be as follows:
Up until Thursday 17th December 2015
And then from:-
4th January 2016 to 7th January 2016
(There will be no clearance on site between 18th December
2015 and 3rd January 2016 inclusive)
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 41-48 von 48
Los 36: Startrite Model 352 Vertical Band Saw
Startrite Model 352 Vertical Band Saw Throat: 350mm (13.7"),
Max. Height Under Guides: 300mm (11.8"), Max. Blade Width: 20mm
(3/4"), Table Size: 450mm X 450mm (17.7" X 17.7"), Tilting Table:
45 Degree, Motor: 0.75 Kw (1 Hp) with Rip Fence & Mitre Gauge.
S/No.79758.
Please Note: This Item is located in Burntwood and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser
Los 36A: Kaltenbach Behringer Model HBP303A Automatic Bandsaw
Kaltenbach Behringer Model HBP303A Automatic Bandsaw (1995)
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Los 37: Morgan Hydraulic Guillotine
Morgan Hydraulic Guillotine, Manual Back Gauge, Front Work Support Arms, Spare Blade. S/No. 6ft x 1/8’’ Capacity
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Los 38: Edwards Model 614 B&P Box & Pan Folder
Edwards Model 614 B&P Box & Pan Folder, 80" x 14 Bg
Gauge Capacity, S/No. 75C/42889
Please Note: This Item is located in Tamworth and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser
Los 39: Gleason Model No. 17A Hypoid Gear Tester
Gleason Model No. 17A Hypoid Gear Tester. S/No. 30221
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Los 40: Pfauter Gear Hobber
Pfauter Gear Hobber
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Los 41: Fellows 6A Gear Shaper
Fellows 6A Gear Shaper
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Los 42: Sparcatron SM25 Die Sink EDM Machine
Sparcatron SM25 Die Sink EDM Machine with Mitutoyo 2 Axis DRO,
50 AMP Generator, 780 x 470 x 300mm Tank Size, 800mm x 300mm Table.
S/No. TVM 164
Please Note: - This Item is located in Cheltenham,
Unfortunately there are no loading facilities at this site.
Dismantling & Loading will be at the cost of the purchaser.