2445 - CNC Lathes & Machining Centre, Conventional Milling & Turning Machines including Oil Country & Facing Lathes, Vertical & Horizontal Borers, Grinders and other associated Machines
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Burntwood and Tamworth. Please see individual lots for loading information.
Clearance Dates :-
Due to the Christmas break the removal dates for these items
will be as follows:
Up until Thursday 17th December 2015
And then from:-
4th January 2016 to 7th January 2016
(There will be no clearance on site between 18th December
2015 and 3rd January 2016 inclusive)
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 48
Lot 1: Bridgeport XV 1000 Vertical Machining Centre with Fanuc OiM Control
Bridgeport XV 1000 Vertical Machining Centre with Fanuc Oi-M Control, 24-Station Tool Change, BT40 Spindle, X Axis Travel 28'', Y Axis Travel 19'', Z Axis Travel 18'', Table Size 30'' x 16.5''. S/No. 070061X (2007)
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lot 2: MHP Model 80-1000 CNC Lathe with Fanuc 21-T Control
MHP Model 80-1000 CNC Lathe with Fanuc 21-T Control, 300mm 3 Jaw
Chuck, 12-Station Turret Plus Tooling, Tail Stock, Swarf Conveyor.
S/No. Mhp80/21tb/98-6/327k (1998)
Please Note: This Item is located in Tamworth and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser.
Lot 3: XYZ Proturn 350 Lathe
XYZ Proturn 350 Lathe, 350mm X 1000mm Gap Bed Capacity, Prototrak LX3 Control, Swing In Gap 600mm, Swing Over Cross Slide : 194mm, 54mm Spindle Bore, 7.5 Hp Spindle Motor, Variable Spindle Speeds : 25 - 3000 RPM. S/No. 029 (1998)
Please Note: This Item is located in Burntwood, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Lot 4: Harrison Alpha 400 Lathe
Harrison Alpha 400 Lathe , 400mm x 1250mm Gap Bed Capacity,
245mm Swing Over Cross Slide, 585mm Swing In Gap, 54mm Spindle
Bore, 15 - 2500 Rpm, 3 & 4 Jaw Chucks, 3 Point Steady, Alpha
Link Plus Pc.(1996)
Please Note: This Item is located in Tamworth and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser
Lot 5: Haas SL-30 TCE CNC Lathe with Haas Control
Haas SL-30 TCE CNC Lathe with Haas Control, Parts Catcher, Tooleye, 12-Station Turret, 250 mm Dia. 3 Jaw Chuck, Programmable Tailstock, Max. Cutting Dia. 432 mm, Max Cutting Length 864 mm, Bar Capacity 76 mm, 3400 RPM Spindle Speeds, S/N 71386 (2005)
Please Note: This Item is located in Tamworth and will require loading by a Forklift Truck.
Lot 6: Colchester Mastiff 1400 Lathe
Colchester Mastiff 1400 Lathe , 21" x 80" Gap Bed Capacity, 3
& 4 Jaw Chucks, Digital Read Out, Quick Change Tool Post Plus
Holders, Swing Over Cross Slide 14 1/2, Spindle Bore 3 1/2", Swing
In Gap 32", 12.5 Hp. S/No. 04716.
Please Note: This Item is located in Burntwood, Unfortunately
there are no loading facilities available on site. Dismantling
& Loading will be at the cost of the purchaser.
Lot 7: Colchester Mastiff 1400 Lathe
Colchester Mastiff 1400 Lathe, 21" x 40" Gap Bed Capacity,
Self-Centring 6 Jaw Chuck, Swing Over Cross Slide: 14 1/2", Spindle
Bore: 3 1/2", Swing In Gap 32", 12.5 Hp. S/No. 00625.
Please Note: This Item is located in Burntwood, Unfortunately
there are no loading facilities available on site. Dismantling
& Loading will be at the cost of the purchaser.
Lot 8: Chieftain Model 1860 Lathe
Chieftain Model 1860 Lathe, 460mm X 1500mm Gap Bed Capacity, 3 Jaw Chuck. Chuck Guard, 3 Point Steady, Quick Change Tool Post Plus Holders, Sino Sds6-2v 2 Axis Digital Read Out, 290mm Swing Over Cross Slide, 700mm Swing in Gap, 80mm Spindle Bore, 25 - 1800 Rpm, 7 1/2 Hp. S/No. 0870020
Please Note: This Item is located in Tamworth and and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 9: Harrison M300 13" x 24" Gap Bed Centre Lathe
Harrison M300 13" x 24" Gap Bed Centre Lathe, 3 Jaw Chuck, Quick
Change Tool Post Plus Holders, Anilam Wizard 211 Digital Read Out,
Dual Imperial & Metric Dials, S/No. 306235
Please Note: This Item is located in Tamworth and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser.
Lot 10: Boxford 4 1/2" Lathe
Boxford 4 1/2" Lathe, 9" x 18" Capacity, 3 Jaw Chuck, 38 - 1300
Rpm, 4 Way Tool Post, Single Phase Electrics. S/No. A22990
Please Note: This Item is located in Burntwood and will be
loaded free of charge to a suitable vehicle. Blocking &
Securing will be at the cost of the purchaser