2431 - Final Phase CNC, Conventional, Inspection, Tooling and Workshop Equipment no longer required due to Restructuring at H.Mullins (Earby) Ltd

Engineering

L'enchère s'est terminée le

2015-10-15 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located at Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.

Please Note: Strict Clearance Date of Thursday 29th October 2015. All items purchased must be removed by this date. 

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Documentation TVA

Veuillez cocher la case ci-dessous et cliquer sur confirmer

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2015-10-19 17:00:00.0

'Date limite d''apurement'

2015-10-29 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Exporter/Importer des détails du Royaume-Uni

Informations importantes

Lots 11-20 de 106

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
15 oct. 2015 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 15: Correa CF 20/20 Machining Centre with Heidenhain TNC 407 Control

Correa CF 20/20 Machining Centre with Heidenhain TNC 407 Control, Table 1800mm x 700mm, Manual Index Universal Head, 50 INT Taper. S/No. 9690802 (1995)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 17: Maho MH1000 C Machining Centre with Grundig Numeric Pilot Control

Maho MH1000 C Machining Centre with Grundig Numeric Pilot Control, Table Size 1100mm x 800mm, 50 INT Taper. S/No. 11105

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 18: Deckel Maho DMC 103V Machining Centre with Heidenhain TNC 426/430M Control

Deckel Maho DMC 103V Machining Centre with Heidenhain TNC 426/430M Control, Renishaw Prove, Table Size 1200mm x 600mm, 24-Position ATC, 4th Axis & 6’’ 3-Jaw Chuck and Tailstock

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 20: Deckel Maho DMC 103V Machining Centre with Heidenhain TNC 426/430 Control

Deckel Maho DMC 103V Machining Centre with Heidenhain TNC 426/430 Control, 24-Position ATC, Table 1200mm x 600mm. S/No. 28860007802

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 21: Cincinnati Arrow 1250 Machining Centre with Acramatic A2100 Control

Cincinnati Arrow 1250 Machining Centre with Acramatic A2100 Control, 24-Position ATC, Table Size 1500mm x 750mm.
S/No. 7055-A00-KK0090 (2000)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 22: Cincinnati Arrow 2-Series Machining Centre with Acramatic A2100 Control

Cincinnati Arrow 2-Series Machining Centre with Acramatic A2100 Control,
22-Position ATC, Table Size 700mm x 500mm. S/No. 7042 A0A KH2392 (2002)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 25: Maho 600 E with Phillips Control

Maho 600 E with Phillips Control, Rotary Table 500mm Dia, Speeds 80-4000 RPM, Swivel Head. S/No. 64608

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 26: Maho MAT with Maho CNC 432 Control

Maho MAT with Maho CNC 432 Control, Table 900mm x 600mm, Rotary Table 350mm DIA, 24-Position ATC. S/No. 98080

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 27: Maho MH2000 with Philips Control

Maho MH2000 with Philips Control, Table 1800mm x 800mm, Horizontal Spindle in Ram, Vertical Head. S/No. 20297

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
15 oct. 2015 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 39: Jones & Shipman 1400 Lar Surface Grinder

Jones & Shipman 1400 Lar Surface Grinder, Power Rise & Fall, Coolant, Dust Extraction, Magnetic Chuck 24’’ x 8’’.
S/No. BO 12176 (1982)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories