2431 - Final Phase CNC, Conventional, Inspection, Tooling and Workshop Equipment no longer required due to Restructuring at H.Mullins (Earby) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located at Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Please Note: Strict Clearance Date of Thursday 29th October 2015. All items purchased must be removed by this date.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 106
Lot 2: Doosan Lynx 300m CNC Lathe with Fanuc i Control
Doosan Lynx 300m CNC Lathe with Fanuc i Control, 254mm Hydraulic
3-Jaw Chuck, 12-Station Turret, Tooleye, Tailstock, Parts Catcher,
LNS Swarf Conveyor. S/No. L 300M0062 (2010)
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 2a: Live Tooling for Doosan Lynx 300m
Live Tooling for Doosan Lynx 300m
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination to include Lots 2 & 2a
Doosan Lynx 300m CNC Lathe with Fanuc i Control, 254mm Hydraulic 3-Jaw Chuck, 12-Station Turret, Tooleye, Tailstock, Parts Catcher, LNS Swarf Conveyor. S/No. L 300M0062 (2010)
and
Live Tooling for Doosan Lynx 300m
Please Note: These Items are located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
2 | Doosan Lynx 300m CNC Lathe with Fanuc i Control |
2a | Live Tooling for Doosan Lynx 300m |
Lot 5A: Autoblok 210mm 3-Jaw Chuck
Autoblok 210mm 3-Jaw Chuck
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 6: Takamaz EX20 CNC Lathe with Takamaz Fanuc Control
Takamaz EX20 CNC Lathe with Takamaz Fanuc Control, Collet Chuck,
2nd Spindle 4’’ 3-Jaw Chuck, Bar Feed, 8-Station Turret, Tooleye,
Parts Catcher. S/No. 400181
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6A: Qty Crawford Collets
Qty Crawford Collets, Tooling & 3-Jaw Hydraulic Chuck for
Takamaz EX20
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6B: Crawford CDC 42 Collet Chuck
Crawford CDC 42 Collet Chuck
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination Bid to include Lots 6, 6a and 6b
Takamaz EX20 CNC Lathe with Takamaz Fanuc Control, Collet Chuck, 2nd Spindle 4’’ 3-Jaw Chuck, Bar Feed, 8-Station Turret, Tooleye, Parts Catcher. S/No. 400181
and
Qty Crawford Collets, Tooling & 3-Jaw Hydraulic Chuck for Takamaz EX20
and
Crawford CDC 42 Collet Chuck
Please Note:- These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
6 | Takamaz EX20 CNC Lathe with Takamaz Fanuc Control |
6A | Qty Crawford Collets |
6B | Crawford CDC 42 Collet Chuck |
Lot 12: Cincom Citizen G16 Sliding Head CNC Lathe
Cincom Citizen G16 Sliding Head CNC Lathe with Fanuc System 2T
Control and Barfeed
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lot 13: Star RNC 16 Sliding Head CNC Lathe with Fanuc OT Control
Star RNC 16 Sliding Head CNC Lathe with Fanuc OT Control, Collet
Chuck, Barfeed, 5 Overhead Slides, 3 Drill Stations, Partcatcher.
S/No. S211 870 330
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.