2426 - CNC & Conventional Toolroom Equipment no longer required by Leigh Precision Grinding & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Birmingham, Burntwood, Cheltenham and Tamworth. Please see individual lots for loading information
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 96
Lot 200: Daewoo Puma 2500SY Lathe with Fanuc 18i-TB Control
Daewoo Puma 2500SY Lathe with Fanuc 18i-TB Control and Multifeed
MX1B Magazine Barfeed Tooleye Parts Catcher, Parts Conveyor Swarf
Conveyor 12 Station With Driven Tool Facility Sub Spindle, X Axis
Travel 250 mm, Z Axis Travel 580 mm, Y Axis Travel 100 mm, B Axis
Travel 580 mm, Tooling Manuals. S/No. P250SY0359 (2004)
Please Note: This Item is located in Tamworth and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser.
Lot 201: Doosan Lynx 220b CNC Lathe with Fanuc 1 Series Control
Doosan Lynx 220b CNC Lathe with Fanuc 1 Series Control, 200 mm 3 Jaw Chuck Tooleye Parts Catcher, X Axis Travel 175 mm, Z Axis Travel 330 mm, Spindle Bore 51 mm 5000 RPM, S/No. L2203942 (2009)
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lot 202: Haas SL-30 TCE CNC Lathe with Haas Control
Haas SL-30 TCE CNC Lathe with Haas Control, Parts Catcher, Tooleye, 12-Station Turret, 250 mm Dia. 3 Jaw Chuck, Programmable Tailstock, Max. Cutting Dia. 432 mm, Max Cutting Length 864 mm, Bar Capacity 76 mm, 3400 RPM Spindle Speeds, S/N 71386 (2005)
Please Note: This Item is located in Tamworth and will require loading by a Forklift Truck.
Lot 202A: Jones & Shipman Model 634x Techmaster
Jones & Shipman Model 634x Techmaster, 600mm X 300mm Close
Pole Magnetic Chuck. S/No. W1020011. (2000)
Please Note: This Item is located in Burntwood,
Unfortunately no loading is available for this lot. Dismantling
& Loading will be at the cost of the purchaser.
Lot 203: MHP Model 80-1000 CNC Lathe with Fanuc 21-T Control
MHP Model 80-1000 CNC Lathe with Fanuc 21-T Control, 300mm 3 Jaw
Chuck, 12-Station Turret Plus Tooling, Tail Stock, Swarf Conveyor.
S/No. Mhp80/21tb/98-6/327k (1998)
Please Note: This Item is located in Tamworth and will be
loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the purchaser.
Lot 204: Harrison Alpha 400 Gap Bed Lathe with GE Fanuc Control
Harrison Alpha 400 Gap Bed Lathe with GE Fanuc Control, Alphalink Software, 400mm x 1250mm Gap bed Capacity, 245mm Swing over cross slide, 585mm swing in gap, 54mm Spindle Bore, 15-2500 RPM. Quick Change Toolpost, 3 & 4 Jaw Chucks, 3 Point Steady. S/No. A30097 (1996)
Please Note:- This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser
Lot 205: Hardinge Talent 6/45 3 Axis CNC Lathe with Siemens 810D Shopturn Control
Hardinge Talent 6/45 3 Axis CNC Lathe with Siemens 810D Shopturn Control, 160 mm 3 Jaw Chuck, 12 Station Turret With Driven Facility, Tailstock, X Axis Travel 228 mm, Z Axis Travel 406 mm, Tooling Manuals. S/No. BLAA3H0051 (2003)
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lot 206: Haas SL-20 TCE CNC Lathe with Haas Control
Haas SL-20 TCE CNC Lathe with Haas Control, Multifeed Short
Magazine Barfeed, Tooleye, Collet Chuck, Tailstock, Max Cutting
Dia. 250 mm, Distance between centres 610 mm, Bar Capacity 52 mm,
4000 RPM Spindle Speeds. S/No. 62765 (2000)
Please Note: This Item is located in Tamworth and will
require loading by a Forklift Truck.
Lot 206A: Suga Cl-15/20 CNC Lathe with Fanuc OT Control
Suga Cl-15/20 CNC Lathe with Fanuc OT Control, Chuck Size 10”, Max. Cutting Dia. 300 mm, Max Cutting Length 450 mm, Spindle Bore 50 mm, 8 Station Turret, Spindle Speeds 50 - 3000 RPM, Tailstock, Swarf Conveyor, Manuals, S/No. 96088B (1996)
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lot 206B: Suga Cl-15/20 CNC Lathe with Fanuc OT Control
Suga Cl-15/20 CNC Lathe with Fanuc OT Control, Chuck Size 10”, Max. Cutting Dia. 300 mm, Max Cutting Length 450 mm, Spindle Bore 50 mm, 8 Station Turret, Spindle Speeds 50 - 3000 RPM, Tailstock, Swarf Conveyor, Manuals, S/No. 96087B (1996)
Please Note: This Item is located in Tamworth and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.