2414A - Inspection Equipment, Tooling & Workshop Equipment due to Restructuring at H.Mullins (Earby) Ltd

Engineering

L'enchère s'est terminée le

2015-09-10 16:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location:- These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2015-09-14 17:00:00.0

'Date limite d''apurement'

2015-09-24 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 200

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
10 sept. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 61: Mitutoyo B231 Coordinate Measuring Machine with Renishaw Probe

Mitutoyo B231 Coordinate Measuring Machine with Renishaw Probe, Table 1100mm x 850mm, X Travel = 750mm, Y Travel = 500mm, Z Travel = 300mm, Computer Monitor Compaq 750, Dell software, Hewlett Packard Printer. S/No. G2300 (2000)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 62: Taylor Bench Model Hobson Shadowgraph

Taylor Bench Model Hobson Shadowgraph , Screen 12’’ dia, Top Table 12’’ x 9’’, Optic Lenses x 10 x 20 x 50 Magnification

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 63: Buck & Hickman Shadowmaster

Buck & Hickman Shadowmaster, Screen 10’’ Dia, Top Table 7’’ x 6’’

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64A: Qty of Metric Micrometers

Qty of Metric Micrometers

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64B: Qty of Imperial Micrometers

Qty of Imperial Micrometers

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64C: Moore & Wright Micro 2000 Electronic Micrometers

Moore & Wright Micro 2000 Electronic Micrometers

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64D: Qty of Bore Gauges

Qty of Bore Gauges

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64E: Qty of Depth Gauges & Inside Micrometers

Qty of Depth Gauges & Inside Micrometers

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64F: Qty of Imperial & Metric Micrometers

Qty of Imperial & Metric Micrometers

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 64G: Qty of Imperial Micrometers

Qty of Imperial Micrometers

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories