2404 - CNC Machining Centres, Lathes & Conventional Toolroom Equipment no longer required by a Leading Manufacturer of Defence & Aerospace Systems
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer, please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office + 39 331 1550 178 or Email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 21
Lot 100: Agie Agiecut 250SF Submerged Wire Erosion Machine with Agie CF 50 Control
Agie Agiecut 250SF Submerged Wire Erosion Machine with Agie CF 50 Control, Auto Wire Feed & Water Processing Tank. S/No. 156
Please Note: This Item is located in Surrey, Unfortunately there
are no loading facilities available. Dismantling and Loading will
be at the cost of the purchaser.
Lot 101: Doosan Mynx 750 CNC Vertical Machining Centre with Fanuc 21iMB CNC System
Doosan Mynx 750 CNC Vertical Machining Centre with Fanuc 21iMB CNC System, Oil Cooler, Filter Mist Oil Filtration, Swarf Management System, Swarf Bin, Air Turbine Head, Nikken Micro Touch Probe, Renishaw M15, approx. 45 items of Tooling (which includes Tooling in the carousel and loose items by side of the machine). Serial No Mynx 750046 (2006)
Please Note: Although the Nikken 4th Axis is shown in photographs, Unfortunately it is not included with this lot. It can however be purchased separately or as a combination
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 101A: Nikken Rotary 4th Axis
Nikken Rotary 4th Axis
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination Bid to Include Lots 101 & 101A
Doosan Mynx 750 CNC Vertical Machining Centre with Fanuc 21iMB CNC System, Oil Cooler, Filter Mist Oil Filtration, Swarf Management System, Swarf Bin, Air Turbine Head, Nikken Micro Touch Probe, Renishaw M15, approx. 45 items of Tooling (which includes Tooling in the carousel and loose items by side of the machine). S/No. Mynx 750046 (2006)
and
Nikken Rotary 4th Axis
Please Note: These Items are located in Surrey, Unfortunately
there are no loading facilities available. Dismantling and Loading
will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 101 | Doosan Mynx 750 CNC Vertical Machining Centre with Fanuc 21iMB CNC System |
| 101A | Nikken Rotary 4th Axis |
Lot 102: Doosan DNM500 CNC Vertical Machining Centre with Fanuc 0i CNC System
Doosan DNM500 CNC Vertical Machining Centre with Fanuc 0i CNC System, 30-Station Tool Changer, Swarf Management, Swarf Bin and Oil Mist Filtration, also to include Tooling which is already in the carousel – approx. 21 Tools. S/No. MV0010-001672 (2012)
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Lot 103: Hitachi Seiki VS 60 CNC Vertical Machining Centre with Seicos Sigma18M CNC System
Hitachi Seiki VS 60 CNC Vertical Machining Centre with Seicos Sigma18M CNC System, Swarf Management, Swarf Bin and Oil Mist Filtration, 90-Station Tool Changer, also to include Tooling already in the Carousel. S/No. VS-60115 (2000)
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 103A: Nikken 4th Axis
Nikken 4th Axis
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination Bid to Include Lots 103 & 103A
Hitachi Seiki VS 60 CNC Vertical Machining Centre with Seicos Sigma18M CNC System, Swarf Management, Swarf Bin and Oil Mist Filtration, 90-Station Tool Changer, also to include Tooling already in the Carousel. S/No. VS-60115 (2000)
and
Nikken 4th Axis
Please Note: These Items are located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 103 | Hitachi Seiki VS 60 CNC Vertical Machining Centre with Seicos Sigma18M CNC System |
| 103A | Nikken 4th Axis |
Lot 104: XYZ 560 MiniMill CNC Vertical Machining Centre with Siemens 810D CNC System
XYZ 560 MiniMill CNC Vertical Machining Centre with Siemens 810D CNC System, Shop Mill 10- Station Tool Changer, Approx. 20 Tools (which includes Tooling in the carousel and loose items by side of the machine). S/No. 0099 (2004)
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 104A: Sun 4th Axis
Sun 4th Axis Model CNC-151 RB (2003) 0315598
Please Note: This Item is located in Surrey, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.