2391 - CNC Lathes, Vertical Machining Centres, Manual Milling Machines, Lathes, Grinders & Other Miscellaneous Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located at Burntwood and Tamworth. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 44
Lot 1: Colchester Tornado T8MSY Lathe with Fanuc 18i-TB Control
Colchester Tornado T8MSY Lathe with Fanuc 18i-TB Control and Hydrafeed Magazine Barfeed, Tooleye, Subspindle, 12-Station Turret with driven tool facility, Swarf Conveyor, Swing over bed 510mm, X Axis Travel = 170mm, Z Axis Travel = 540mm, A Axis Travel = 625mm, Y Axis Travel = 80mm, C Axis 0.001°. S/No. W8E016 (2009)
Please Note: This Item is located in Tamworth and will require loading by a Forklift Truck which will be at the cost of the purchaser
Lot 2: Haas SL-30 TCE CNC Lathe with Haas Control
Haas SL-30 TCE CNC Lathe with Haas Control, Tooleye, Parts Catcher, 12-Station Turret, 250mm Dia 3-Jaw Chuck, Programmable Tailstock, Max. Cutting Dia. 432mm, Max Cutting Length 864mm, Bar Capacity 76mm, 3400 RPM Spindle Speeds. S/No. 71386 (2005)
Please Note: This Item is located in Tamworth and will require loading by a Forklift Truck which will be at the cost of the purchaser
Lot 3: Haas SL-30 CNC Lathe with Haas Control
Haas SL-30 CNC Lathe with Haas Control, Tooleye, 12-Station Turret, 250mm dia chuck, Programmable Tailstock, Max. Cutting Dia. 432mm, Max. Cutting Length 864mm, Bar Capacity 76mm, 3400 RPM Spindle Speeds. S/No 64912 (2002)
Please Note: This Item is located in Tamworth and will require loading by a Forklift Truck which will be at the cost of the purchaser
Lot 4: Haas SL-20 TCE CNC Lathe with Haas Control
Haas SL-20 TCE CNC Lathe with Haas Control, Multifeed Short Magazine Barfeed, Tooleye, Collet Chuck, Tailstock, Max. Cutting Dia. 250mm, Distance between centres 610mm, Bar Capacity 52mm, 4000 RPM Spindle Speeds. S/No 62765 (2000)
Please Note: This Item is located in Tamworth and will require loading by a Forklift Truck which will be at the cost of the purchaser
Lot 5: Tornos ENC 264 Sliding Head CNC Lathe with Fanuc O-TT Control
Tornos ENC 264 Sliding Head CNC Lathe with Fanuc O-TT Control, Robobar Magazine Barfeed, Parts Catcher, Swarf Conveyor, 8-Draw Tooling Cabinet with Contents. S/No. T59738 (1996)
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser
Lot 6: Colchester Tornado 200 CNC Lathe with Fanuc OT Control
Colchester Tornado 200 CNC Lathe with Fanuc OT Control, 12-Station VD1 Turret with Tooling, Collet & 3-Jaw Chucks, 530mm Swing over bed, 400mm distance between centres, 65mm Bar Capacity, Swarf Conveyor. S/No. C20029 (1994)
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser
Lot 7: Hardinge Cobra 42 CNC Lathe with Bar Feed with Fanuc 21-T Control
Hardinge Cobra 42 CNC Lathe with Bar Feed with Fanuc 21-T Control, 12-Station Turret, Hydrafeed Multifeed Short magazine Bar Feed, Collet and 3-Jaw Chucks, Swarf Conveyor
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser
Lot 8: Colchester Combi Teach Lathe with Fanuc 210i-T Control
Colchester Combi Teach Lathe with Fanuc 210i-T Control, 3-Jaw Manual Chuck, O.C.T.P with holders, 400mm Swing over bed, 585mm Swing in gap, 1250mm Distance between centre, 210mm X Axis Travel, 1181mm Z Axis Travel, 54mm Spindle Bore. S/No. E700031 (1998)
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser
Lot 8a: Harrison Alpha 400 Gap Bed Lathe
Harrison Alpha 400 Gap Bed Lathe with 400mm x 1250mm Gap bed Capacity, 245mm Swing over cross slide, 585mm swing in gap, 54mm Spindle Bore, 15-2500 RPM. S/No. A30134 (1996)
Please Note:- This Item is located in Burntwood, Unfortunately there is no loading at this site. Dismantling & loading will be at the cost of the purchaser
Lot 9: Iemca V.I.P 70/15 CNC Short Magazine Barfeed
Iemca V.I.P 70/15 CNC Short Magazine Barfeed. S/No. 98071315 (1998)
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser