2380 - Toolroom Plant & Machinery Available due to retirement, formerly used by Ascot Precision Tooling Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in the West Midlands - Unfortunately there are no loading at this site. Dismantling & Loading will be at the cost of the purchaser
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer,
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on +39 073 267 7063 or email
info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 84
Lot 1: Fanuc Robocut Alpha 1C Type A04B-0310-3001/E5 Wire Eroder
Fanuc Robocut Alpha 1C Type A04B-0310-3001/E5 Wire Eroder with Fanuc Series 16-W Control, Tank Size 1m x 750mm, X = 520, Y = 370, Z = 300 Axis Travel. S/No. P97Y1C751 (1997)
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 2: Cincinnati Sabre 1250 Vertical Milling Machine
Cincinnati Sabre 1250 Vertical Milling Machine, Table Size 1360mm x 650mm, X Axis = 1250mm, Y Axis = 660mm, Z Axis = 660mm, 21-Station ATC, BT40 Tooling, 8,000 RPM Spindle, GE Fanuc Series 0-M Control S/No. 7037/A02/90/005 with Tooling
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 3: Cincinnati Arrow 750 Vertical Machining Centre with FNC Control
Cincinnati Arrow 750 Vertical Machining Centre with FNC Control, Table Size 950mm x 520mm, X Axis = 762mm, Y Axis = 510mm, Z Axis = 510mm, 21-Station ATC, CAT 40 Tooling, 6,000 RPM Spindle. S/No. 7043 C00RL 0185
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 4: Brown & Sharpe Validator Coordinate Measuring Machine
Brown & Sharpe Validator Coordinate Measuring Machine, 600mm x 600mm Table, 400mm Height
(Please Note: Last calibration by Quality Control Technology)
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 5: Huron Type KU4 Milling Machine
Huron Type KU4 Milling Machine, Digipac 3 axis DRO, Table Size 1430mm x 400mm, 40 International Tooling. S/No. 5858 1984
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 6: Bridgeport Series I 2HP Turret Mill
Bridgeport Series I 2HP Turret Mill, Table Size 42’’ x 9’’, Heidenhain 2 Axis DRO, Power Cross Feed, Qty of Tooling. S/No. 273580378U
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 7: Bridgeport Turret Mill
Bridgeport Turret Mill, Power Cross Feed, Table Size 42’’ x 9’’, Qty of Tooling. S/No. BRU/200 9B
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 8: Newall Jig Borer
Newall Jig Borer, Digipac 2 Axis Dro, Table Size 36’’ x 24’’, 6 Spindle Speeds, 40 – 2500 RPM, Qty of Tooling S/No. 54-JA-2436-133
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 9: Harrison 600 Gap Bed Centre Lathe
Harrison 600 Gap Bed Centre Lathe, Distance between centres 42’’, 10’’ 3-Jaw Chuck, 12’’ 4-Jaw Chuck, (2) Face Plates 23’’and 15’’. S/No. 402719
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser
Lot 10: Jones & Shipman 1415 P/F1 Surface Grinder
Jones & Shipman 1415 P/F1 Surface Grinder, Table Size 36’’ x 11’’, Magnetic Chuck 24’’ x 12’’ with Coolant. S/No. B0 96406
Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser