2372A - Phase 3 of High quality range of Tajmac Mori-Say, Gildemeister and Wickman Multi-Spindle Automatic Lathes and Associated Equipment previously used by MRT Spa, Bergamo, Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Suisio (Bergamo) - Unfortunately there are no loading facilities on site, Dismantling & Loading will be at the cost of the purchaser
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer,
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 073 267 7063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 71
Lot 87: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Threading Attachment logan position 3, (4) Fixed Toolholder supports, (3) Drill Toolholder Morse Taper, (1) Front Turning Equipment, (4) Modularized Toolholder, (1) Toolholder for cutting with micrometric sizing, (1) Independent Control Position 6. S/No: 14754
Please Note: This Item is located in Suisio (Bergamo)
Lot 88: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Threading Attachment Logan Position 3, (4) Modularised Toolholder, (1) Toolholder for cutting with micrometric sizing, (3) Fixed drill toolholder supports, (2) Drill Toolholder Morse Taper, (1) Front Turning Equipment. S/No. 30035
Please Note: This Item is located in Suisio (Bergamo)
Lot 89: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Wedge Recessing device by TSE, (1) Threading Attachment Logan (Missing Transmission), (4) Modularized Toolholder, (1) Toolholder for cutting with micrometric sizing, (3) Fixed Drill Toolholder Supports, (2) Drill Toolholder Morse Taper, (1) Front Turning Equipment. S/No. 30024
Please Note: This Item is located in Suisio (Bergamo)
Lot 90: Wickman 3 1/4" 6 Bar Multi-Spindle Automatic
Wickman 3 1/4" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Wedge recessing device by TSE, (5) Fixed Drill Toolholder Supports, (1) Driving Gear-box for speed drilling, (3) Drill Toolholder Morse Taper, (1) Cylindrical Toolholder, (2) Front Turning, (4) Modular Toolholder, (1) Toolholder for cutting with micrometric sizing, (1) Independent control position 6. S/No. 17017
Please Note: This Item is located in Suisio (Bergamo)
Lot 97: Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe S/No: 141
with Aemme Control Panel
Please Note: This Item is located in Suisio (Bergamo)
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 98: Cucchi Giovanni Type CMSP.625 Bar Loader
Cucchi Giovanni Type CMSP.625 Bar Loader, CE Compliant. S/No. CMSP.62508098 (2008)
Please Note: This Item is located in Suisio (Bergamo)
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 99: Combination of Lots 97 & 98:-
Combination of Lots 97 & 98:-
Gildemeister Type AS16 Automatic Multi-Spindle Lathe S/No: 141 with PM Impianti Control Panel
and
Cucchi Giovanni Type CMSP.625 Bar Loader. S/No: CMSP.62508098 (2008)
Please Note: This Item is located in Suisio (Bergamo)
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
97 | Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe |
98 | Cucchi Giovanni Type CMSP.625 Bar Loader |
Lot 108: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 094
with PM Impianti Control Panel. S/No. 0047/11 (2000)
and Cucchi Giovanni Type CMSP 28 Bar Loader. S/No. CMSP 99.032 (1999)
Please Note: This Item is located in Suisio (Bergamo)
Lot 110: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 042
with PM Impianti Control Panel. S/No. 0047/09 (2000)
and Cucchi Giovanni Type CMSP 625 Bar Loader. S/No. CMSP 96.002 (1996)
Please Note: This Item is located in Suisio (Bergamo)
Lot 112: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 035
with PM Impianti Control Panel. S/No. 0047/04 (2000)
and Cucchi Giovanni Type CMSP.28 Bar Loader. S/No. CMSP - 97006 (1997)
Please Note: This Item is located in Suisio (Bergamo)