2372A - Phase 3 of High quality range of Tajmac Mori-Say, Gildemeister and Wickman Multi-Spindle Automatic Lathes and Associated Equipment previously used by MRT Spa, Bergamo, Italy
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location:- These Items are located in Suisio (Bergamo) - Unfortunately there are no loading facilities on site, Dismantling & Loading will be at the cost of the purchaser
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer,
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 073 267 7063 or email info@cottandco.it
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 41-50 von 71
Los 87: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Threading Attachment logan position 3, (4) Fixed Toolholder supports, (3) Drill Toolholder Morse Taper, (1) Front Turning Equipment, (4) Modularized Toolholder, (1) Toolholder for cutting with micrometric sizing, (1) Independent Control Position 6. S/No: 14754
Please Note: This Item is located in Suisio (Bergamo)
Los 88: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Threading Attachment Logan Position 3, (4) Modularised Toolholder, (1) Toolholder for cutting with micrometric sizing, (3) Fixed drill toolholder supports, (2) Drill Toolholder Morse Taper, (1) Front Turning Equipment. S/No. 30035
Please Note: This Item is located in Suisio (Bergamo)
Los 89: Wickman 2 5/8" 6 Bar Multi-Spindle Automatic
Wickman 2 5/8" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Wedge Recessing device by TSE, (1) Threading Attachment Logan (Missing Transmission), (4) Modularized Toolholder, (1) Toolholder for cutting with micrometric sizing, (3) Fixed Drill Toolholder Supports, (2) Drill Toolholder Morse Taper, (1) Front Turning Equipment. S/No. 30024
Please Note: This Item is located in Suisio (Bergamo)
Los 90: Wickman 3 1/4" 6 Bar Multi-Spindle Automatic
Wickman 3 1/4" 6 Bar Multi-Spindle Automatic, Control Panel, (1) Wedge recessing device by TSE, (5) Fixed Drill Toolholder Supports, (1) Driving Gear-box for speed drilling, (3) Drill Toolholder Morse Taper, (1) Cylindrical Toolholder, (2) Front Turning, (4) Modular Toolholder, (1) Toolholder for cutting with micrometric sizing, (1) Independent control position 6. S/No. 17017
Please Note: This Item is located in Suisio (Bergamo)
Los 97: Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe S/No: 141
with Aemme Control Panel
Please Note: This Item is located in Suisio (Bergamo)
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 98: Cucchi Giovanni Type CMSP.625 Bar Loader
Cucchi Giovanni Type CMSP.625 Bar Loader, CE Compliant. S/No. CMSP.62508098 (2008)
Please Note: This Item is located in Suisio (Bergamo)
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 99: Combination of Lots 97 & 98:-
Combination of Lots 97 & 98:-
Gildemeister Type AS16 Automatic Multi-Spindle Lathe S/No: 141 with PM Impianti Control Panel
and
Cucchi Giovanni Type CMSP.625 Bar Loader. S/No: CMSP.62508098 (2008)
Please Note: This Item is located in Suisio (Bergamo)
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
97 | Gildemeister Type IMIS TAM 6/20 Automatic Multi-Spindle Lathe |
98 | Cucchi Giovanni Type CMSP.625 Bar Loader |
Los 108: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 094
with PM Impianti Control Panel. S/No. 0047/11 (2000)
and Cucchi Giovanni Type CMSP 28 Bar Loader. S/No. CMSP 99.032 (1999)
Please Note: This Item is located in Suisio (Bergamo)
Los 110: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 042
with PM Impianti Control Panel. S/No. 0047/09 (2000)
and Cucchi Giovanni Type CMSP 625 Bar Loader. S/No. CMSP 96.002 (1996)
Please Note: This Item is located in Suisio (Bergamo)
Los 112: Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe
Gildemeister Type IMIS TAM 6/20 modified to AS25 Automatic Multi-Spindle Lathe. S/No. 035
with PM Impianti Control Panel. S/No. 0047/04 (2000)
and Cucchi Giovanni Type CMSP.28 Bar Loader. S/No. CMSP - 97006 (1997)
Please Note: This Item is located in Suisio (Bergamo)