2370 - Conventional & Fabrication Equipment formerly used by Precision Engineering Services & Others
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: Machinery has been removed for convenience of loading and Items are located in Cheshire. These Items will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 8 however is located in Stockport and unfortunately there are no loading facilities at this site
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 63
Przedmiot 1: Ajax Model 310 CNC Centre Lathe with GE Fanuc Series 2li-TB Control
Ajax Model 310 CNC Centre Lathe with GE Fanuc Series 2li-TB Control, Swing Over Bed 600mm, Distance Between Centres 2000mm, 8-Station Indexing Tool Post, Spindle Bore 110mm, 400mm 3 Jaw Chuck (2005)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 2: Lang Type 10B2 Centre Lathe
Lang Type 10B2 Centre Lathe, Swing Over Bed 25 1/2",Distance Between Centres 84", Spindle Bore 4", Spindle Speeds 7.7-813rpm, Taper Turning, 20" 4 Jaw Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 3: Kitchen Walker Model E50-1250 Radial Arm Drill
Kitchen Walker Model E50-1250 Radial Arm Drill, Arm Radius 1250mm, Drilling Capacity 50mm, Spindle Taper No. 4 Morse, Spindle Speeds 25-1560 rpm, Drilling Depth 350mm, Power Feed To Spindle, Power Locking, Power Rise & Fall, Telescopic DC Injection Brake, Kitchen & Walker Swivel & Tilt Table and Coolant
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 4: Churchill Type RBY 25" Ring Grinder
Churchill Type RBY 25" Ring Grinder, Tilting Table. 25" Electro-Magnetic Chuck.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 5: Harrison M400 Gap Bed Centre Lathe
Harrison M400 Gap Bed Centre Lathe, Swing Over Bed 16", Swing In Gap 24", Distance Between Centres 60", Spindle Bore 2 1/2", Spindle Speeds 40 - 2000 RPM, Dual Dials, Quick Change Tool Post, Taper Turning
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 6: Promecam Type RG 2400-80 Hydraulic Upstroking Press Brake
Promecam Type RG 2400-80 Hydraulic Upstroking Press Brake, Distance Between Side Frames 2150mm, Throat Depth 400mm, Length of Stroke 100mm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 7: Startrite Type V900H Toolroom Vertical Bandsaw
Startrite Type V900H Toolroom Vertical Bandsaw, Throat 900mm, Daylight 400mm, Variable Speed, Power Feed To Table, Front Table Size 700mm x 600mm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 8: Hurco Hawk 5M CNC Milling Machine with Ultimax 3 CNC Control
Hurco Hawk 5M CNC Milling Machine with Ultimax 3 CNC Control, Table Size 1066mm x 330mm (42" x 13"), X Axis 800mm. Y Axis 350mm. Z Axis 125mm, Knee Travel 375mm. Spindle Taper CAT 40, Spindle Speeds 100 - 3500rpm, Power Drawbar (1996)
Please Note: This Item is located in Stockport. There are no loading facilities on site
Przedmiot 9: Semco Type LC205-V5 Heady Duty Turret Milling Machine
Semco Type LC205-V5 Heady Duty Turret Milling Machine with Pendant Control, Table Size 51" x 12", Spindle Taper 40 ISO, Variable Speed 50 - 3750 RPM, Power Draw Bar, 2 Axis Digital Readout
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Przedmiot 10: Dean Smith & Grace Type 21x108 Centre Lathe
Dean Smith & Grace Type 21x108 Centre Lathe, Swing Over Bed 21", Distance Between Centres 108", Spindle Bore 3 1/2", Spindle Speeds 10 - 800rpm, 4 Way Tool Post, 2 Point Steady, 3 Jaw Chuck, Face Plate
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser