2370 - Conventional & Fabrication Equipment formerly used by Precision Engineering Services & Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: Machinery has been removed for convenience of loading and Items are located in Cheshire. These Items will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 8 however is located in Stockport and unfortunately there are no loading facilities at this site
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 63
Los 1: Ajax Model 310 CNC Centre Lathe with GE Fanuc Series 2li-TB Control
Ajax Model 310 CNC Centre Lathe with GE Fanuc Series 2li-TB Control, Swing Over Bed 600mm, Distance Between Centres 2000mm, 8-Station Indexing Tool Post, Spindle Bore 110mm, 400mm 3 Jaw Chuck (2005)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 2: Lang Type 10B2 Centre Lathe
Lang Type 10B2 Centre Lathe, Swing Over Bed 25 1/2",Distance Between Centres 84", Spindle Bore 4", Spindle Speeds 7.7-813rpm, Taper Turning, 20" 4 Jaw Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 3: Kitchen Walker Model E50-1250 Radial Arm Drill
Kitchen Walker Model E50-1250 Radial Arm Drill, Arm Radius 1250mm, Drilling Capacity 50mm, Spindle Taper No. 4 Morse, Spindle Speeds 25-1560 rpm, Drilling Depth 350mm, Power Feed To Spindle, Power Locking, Power Rise & Fall, Telescopic DC Injection Brake, Kitchen & Walker Swivel & Tilt Table and Coolant
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 4: Churchill Type RBY 25" Ring Grinder
Churchill Type RBY 25" Ring Grinder, Tilting Table. 25" Electro-Magnetic Chuck.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 5: Harrison M400 Gap Bed Centre Lathe
Harrison M400 Gap Bed Centre Lathe, Swing Over Bed 16", Swing In Gap 24", Distance Between Centres 60", Spindle Bore 2 1/2", Spindle Speeds 40 - 2000 RPM, Dual Dials, Quick Change Tool Post, Taper Turning
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 6: Promecam Type RG 2400-80 Hydraulic Upstroking Press Brake
Promecam Type RG 2400-80 Hydraulic Upstroking Press Brake, Distance Between Side Frames 2150mm, Throat Depth 400mm, Length of Stroke 100mm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 7: Startrite Type V900H Toolroom Vertical Bandsaw
Startrite Type V900H Toolroom Vertical Bandsaw, Throat 900mm, Daylight 400mm, Variable Speed, Power Feed To Table, Front Table Size 700mm x 600mm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 8: Hurco Hawk 5M CNC Milling Machine with Ultimax 3 CNC Control
Hurco Hawk 5M CNC Milling Machine with Ultimax 3 CNC Control, Table Size 1066mm x 330mm (42" x 13"), X Axis 800mm. Y Axis 350mm. Z Axis 125mm, Knee Travel 375mm. Spindle Taper CAT 40, Spindle Speeds 100 - 3500rpm, Power Drawbar (1996)
Please Note: This Item is located in Stockport. There are no loading facilities on site
Los 9: Semco Type LC205-V5 Heady Duty Turret Milling Machine
Semco Type LC205-V5 Heady Duty Turret Milling Machine with Pendant Control, Table Size 51" x 12", Spindle Taper 40 ISO, Variable Speed 50 - 3750 RPM, Power Draw Bar, 2 Axis Digital Readout
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 10: Dean Smith & Grace Type 21x108 Centre Lathe
Dean Smith & Grace Type 21x108 Centre Lathe, Swing Over Bed 21", Distance Between Centres 108", Spindle Bore 3 1/2", Spindle Speeds 10 - 800rpm, 4 Way Tool Post, 2 Point Steady, 3 Jaw Chuck, Face Plate
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser