2353 - CNC Machining Centres, Lathes & Grinders formerly used in the Aerospace Industry & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Birmingham and Gloucester
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment with the Auctioneer only, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-8 de 8
Lot 300: Mori Seiki NH6300 DGC Twin Pallet Horizontal Machining Centre
Mori Seiki NH6300 DGC Twin Pallet Horizontal Machining Centre with MSG-501 CNC Control, 630mm2 Pallets, X=900mm, Y=800mm, Z=980mm, B=1 °, BT50, 10,000 RPM, Cool Jet High Pressure Coolant, Swarf Conveyor, 50m/min Rapids, 60-Station Tool Changer. S/No. NH631DB0009 (2004)
Please Note: This Item is located in Gloucestershire and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 301: Chiron Mill 2000 4-Axis Vertical Machining Centre
Chiron Mill 2000 4-Axis Vertical Machining Centre with Fanuc 18i-MB5 Control, Table Size: 2600mm x 550mm, X = 2000mm, Y = 500mm, Z = 550mm, Pieseler 4th Axis = 360.000 degree, Maximum Spindle Speed: 9000 RPM, 24-Station Tool Magazine, 40m/min Rapids (2004)
Please Note: This Item is located in Gloucestershire and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 302: Mazak Integrex 400 Y CNC Lathe with Mazatrol PC Fusion CNC Control
Mazak Integrex 400 Y CNC Lathe with Mazatrol PC Fusion CNC Control, Y Axis and Milling Facilitiy, 20 Station ATC, 3-Jaw Chuck, Tooleye, Tailstock, Swarf Conveyor S/No. 146006 (2000)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 303: Mazak Super Quickturn 250M 3-Axis Turning Centre
Mazak Super Quickturn 250M 3-Axis Turning Centre with Mazatrol PC Fusion 640T Control, Maximum Turning Diameter: 300mm, Maximum Turning Length: 500mm, 64mm Bar Capacity, Spindle 4000rpm, C-Axis = 360.000 degree, 12-Station Turret with Driven Tools (4000 RPM) (1998)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 304: Daewoo Puma 200MC CNC Lathe
Daewoo Puma 200MC CNC Lathe with Fanuc Series 18-T Control, Tool Eye, Turning Capacity: 210 x 550mm, 65mm Bar, 4,500 rpm Spindle, C-Axis, Parts Catcher, 12-Station Turret with Driven Tools. S/No. P20M0247 and Iemca VIP 70 CNC Bar Feed with Swarf Conveyor
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 305: Citizen L32-VII Sliding Head Turning Centre
Citizen L32-VII Sliding Head Turning Centre with Mitsubishi Meldas 500 Series (Cincom System IV-C) Control, Maximum Bar Capacity 32mm, Main Spindle Speeds 200 - 8000rpm (5Hp), Sub-Spindle Speeds 200 - 6000rpm, Rotary Tool Spindle Speed 200 - 5000rpm, Main Spindle Full C-Axis, Sub-spindle Indexing, (3) Cross Driven Tools, (5) Platen Turning Tools, (3) Back Working Tools, (3) End Working Tools, Parts Catcher, Magazine Bar Feed (1998)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 306: Startrite V900F Vertical Bandsaw
Startrite V900F Vertical Bandsaw, Throat Depth 920mm, Variable Blade Speed, Tilting Table (+450/-150), Blade Welder, Low Voltage Light. S/No. 130485
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing however, will be at the cost of the purchaser
Lot 307: Jones & Shipman Dominator 624 CNC Surface Grinder
Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Table 600 mm x 200 mm, Equipped with 4th Axis, Coolant/Filtration System (Installed 2002)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser