2347 – Final RSM Industries Ltd Auction Consisting of Power Presses, Toolroom, Well Laid out & Equipped Welding Shop, Lifting & General Equipment and MAN Curtain Sided Lorry

Engineering

L'enchère s'est terminée le

2014-11-13 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location:- These Items are located in Coventry

Lot 8A however is located in West Bromwich - Dismantling and Loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing by Appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2014-11-17 17:00:00.0

'Date limite d''apurement'

2014-11-27 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 21-30 de 63

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
13 nov. 2014 16:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 127: British Federal 50KVA Water Cooled Spot Welder

British Federal 50KVA Water Cooled Spot Welder 525mm Throat. S/No. 19235

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 16:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 128: British Federal 50KVA Water Cooled Spot Welder

British Federal 50KVA Water Cooled Spot Welder, 400mm Throat, 150mm Platens. S/No. 17763 with Meritus Weld Control

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 129: British Federal Water Cooled Spot Welder

British Federal Water Cooled Spot Welder, 400mm Throat, 150mm Platens

Please Note: Sold as is

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 133: Elektra Beckum 350 Mig Welding Source

Elektra Beckum 350 Mig Welding Source

Please Note: No gun

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 134: Esab LKB62 Mig Welder

Esab LKB62 Mig Welder, 1500mm x 800mm Steel Table, (2) Steel Cabinets

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 136: Castolin Eutectic AC/DC Tig Welder

Castolin Eutectic AC/DC Tig Welder. S/No. 09480257 (2002)

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 207: Rambaudi Miniram CNC Bed Milling Machine with Heidenhain CNC Control

Rambaudi Miniram CNC Bed Milling Machine with Heidenhain CNC Control, 1300 x 450 Table, 3 x 40 INT Spindles. S/No. 116248

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 15:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 215: Jones & Shipman 1300 Universal Grinder

Jones & Shipman 1300 Universal Grinder, 10’’ x 27’’ Capacity, Internal Spindle and Coolant

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Preview image
Fin:
13 nov. 2014 15:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 215A: Belt Linisher, 6’’ x 36’’

Belt Linisher, 6’’ x 36’’

Please Note: This Item is located in Coventry

Preview image
Fin:
13 nov. 2014 16:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 222: Semi Freestanding Crane Track

Semi Freestanding Crane Track, 100ft x 6t, Approx. 2000kg Capacity with (2) 2000kg Liftech Electric Hoists and Floor Mounted Work/Tool Stands

Please Note: This Item is located in Coventry - Dismantling and Loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories