2345 – CNC and Manual Machine Tools available due to retirement at A.T. Roberts Ltd manufacturers of Rollers, Shafts, Cylinders for the Printing, Packaging, Paper and Film Industries, Lindemann Baler, Shears, Generator & Hyster 2000kg Forklift Truck
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: Due to the location and complexity of the site at A.T. Roberts in Watford Lots 1 - 12 inclusive must be uplifted and loaded to suitable transport by one approved contractor being AIMS (Associated Industrial Machinery Services)
These lots should be removed during the period of the 8th - 17th December 2014 with lots 1 - 3 being the first to be removed on Monday 8th December 2014
Loading charges for each machine are listed against each lot and will be added to the purchasers invoice. All loading arrangements should be made directly with Mr Martin Riddell at AIMS - Tel. 01384 350 517 or 07944 937 790
Lots 94 - 97 however are located in Southampton and Unfortunately there are No loading facilities at this location - Clearance for these Items are 4th December 2014
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 102
Lot 1: PBR T-400 Gap Bed Centre Lathe
PBR T-400 Gap Bed Centre Lathe, 400mm Centre Height, 6000mm Bed
Length, QCTP 4-Jaw Chuck, 2 & 3 Point Steady. Spindle Bore
130mm
S/No. 81829 (1975)
Please Note:
Tooling shown on topslide is not included
This Item is located in Watford. The Fee for loading this
item to a suitable vehicle by AIMS is £1875. This charge will be
added to your invoice. Please make prior arrangement with Mr Martin
Riddell at AIMS on 01384 350 517 - Please Note this price does not
include packing or strapping - this is at the responsibility of the
buyer
This Item must be collected on the 8th December
2014
Lot 2: Poreba PL 42-480 Gap Bed Centre Lathe
Poreba PL 42-480 Gap Bed Centre Lathe, 465mm Centre Height, 4m between centres, 4-way Tool Post, 800mm 4-Jaw Chucks, 500mm 3-Jaw Chuck, 3-Point Steady, 95mm Spindle Bore, Sony DRO. S/No. 0453862
Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £1475. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer
This Item must be collected on the 8th December 2014
Lot 3: TOS SUS 63 Straight Bed Centre Lathe
TOS SUS 63 Straight Bed Centre Lathe, 315mm Centre Height, 3.5m between centres, 4-Way Tool Post, 500mm 4-Jaw Chucks, 400mm 3-Jaw Chuck, 2 & 3 Point Steadies, Sony DRO, 82mm Spindle Bore. S/No. 0453862
Please Note:
Centre in tailstock not included with this lot
This Item is located in Watford. The Fee for loading this
item to a suitable vehicle by AIMS is £1475. This charge will be
added to your invoice. Please make prior arrangement with Mr Martin
Riddell at AIMS on 01384 350 517 - Please Note this price does not
include packing or strapping - this is at the responsibility of the
buyer
This Item must be collected on the 8th December 2014
Lot 4: Niles DLZ 630 Straight Bed Centre Lathe
Niles DLZ 630 Straight Bed Centre Lathe, 305mm Centre Height, 2.5m between centres, 4-Way Toolpost, 400mm 4-Jaw Chucks, 3-Point Steady, Sony DRO, 72mm Spindle Bore. S/No. 155.0023.56 (1972)
Please Note: This Item is located in Watford. The Fee for
loading this item to a suitable vehicle by AIMS is £980. This
charge will be added to your invoice. Please make prior arrangement
with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this
price does not include packing or strapping - this is at the
responsibility of the buyer
Must be collected between the 9th - 17th December 2014
Lot 5: Dean Smith & Grace Type 17 x 96’’ Centre Lathe
Dean Smith & Grace Type 17 x 96’’ Centre Lathe, 8 ½ Centre Height 96’’ between centres, 4-way Tool Post, 2 & 3 Point Steadies, 400mm 4-Jaw, 300MM 3-Jaw Chucks, Power Drilling Attachment, Sony DRO. S/No. 36491-11-66
Please Note:
Collet Chuck shown in the photographs with this lot is not
included
This Item is located in Watford. The Fee for loading this
item to a suitable vehicle by AIMS is £980. This charge will be
added to your invoice. Please make prior arrangement with Mr Martin
Riddell at AIMS on 01384 350 517 - Please Note this price does not
include packing or strapping - this is at the responsibility of the
buyer
Must be collected between the 9th - 17th December 2014
Lot 5a: Collet Chuck with Collets
Collet Chuck with Collets
Please Note: These Items are located in Watford
Lot 6: Takisawa TC3 CNC Lathe with Fanuc 10 TF Control
Takisawa TC3 CNC Lathe with Fanuc 10 TF Control, 300mm 3-Jaw Hydraulic Chuck, 8-Station Turret, Tailstock. S/No. THUT 8770 MT 1004
Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £560. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer
Must be collected between the 9th - 17th December 2014
Lot 7: Harrison M500 CNC Lathe with Anilan 1200 T-D Control
Harrison M500 CNC Lathe with Anilan 1200 T-D Control Centre Height, 2m between centres, 530mm Swing Over Bed, QCTP, 3-Point Steady. S/No. 501572-1413
Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £980. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer
Must be collected between the 9th - 17th December 2014
Lot 7a: Harrison Quick Change Unit with Quick Change Tooling
Harrison Quick Change Unit with Quick Change Tooling
Please Note: These Items are located in Watford
Lot 8: Colchester Triumph 2000 x 30’’ Straight Bed Centre Lathe
Colchester Triumph 2000 x 30’’ Straight Bed Centre Lathe, 7.5’’ Centre Height, 30’’ between centres, QCTP, 3-Point Steady, 3-Jaw Chuck, Face and Catch Plates. S/No. 6/0001/17471