2337 - CNC Lathes and Vertical Machining Centres formerly used by Insight Precision Engineering & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Birmingham and Nottingham
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 13
Lot 600: Cincinnati Sabre 500 Vertical Machining Centre with Heidenhain TNC 415 Control
Cincinnati Sabre 500 Vertical Machining Centre with Heidenhain TNC 415 Control, Table Size: 650 x 510mm, 21ATC, Swarf Conveyor, Through Spindle Coolant, X = 510mm, Y = 510mm, Z = 510mm. S/No. 912023828 (1994)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 600A: Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control
Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control, Table Size 2286mm x 765mm, Max Load 3000kg, 40 – 6000 RPM, BT50 Spindle, Twin Swarf Conveyors, Coolant. X = 2032mm, Y = 762mm, Z = 770mm. S/No. 7052 A00 RA 0022 (1998)
Please Note: This Item is located in Nottingham
This Lot does not include Any Tooling, Fixtures, or OE Unit that may be shown in the lot photographs
Lot 601: Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control
Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control, Robobar Magazine Bar Feed SSF/532/3200 (2000) and Swarf Feed Conveyor, Hours of work 61,479. S/No. 1179 (2000)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 601A: Tornos Tooling
Tornos Tooling
Please Note: This Item is located in Birmingham
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination Bid to Include Lots 601 & 601A
Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control, Robobar Magazine Bar Feed SSF/532/3200 (2000) and Swarf Feed Conveyor, Hours of work 61,479. S/No. 1179 (2000)
and
Tornos Tooling
Please Note: These Items are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
601 | Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control |
601A | Tornos Tooling |
Lot 602: Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control
Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control, Robobar Magazine Bar Feed SSF/532/ (2000) and Swarf Feed Conveyor, Hours of work 37,175. S/No. 1098 (2000)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 602A: Tornos Tooling
Tornos Tooling
Please Note: This Item is located in Birmingham
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination Bid to Include Lots 602 & 602A
Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control, Robobar Magazine Bar Feed SSF/532/ (2000) and Swarf Feed Conveyor, Hours of work 37,175. S/No. 1098 (2000)
and
Tornos Tooling
Please Note: These Items are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
602 | Tornos Deco 2000/26 Multi axis Sliding head CNC Lathe with Fanuc PNC Control |
602A | Tornos Tooling |
Lot 602B: Polygon Turning Attachment for Tornos
Polygon Turning Attachment for Tornos
Please Note: This Item is located in Birmingham
Lot 603: Mazak QT20 CNC Lathe with Mazatrol T-Plus Control
Mazak QT20 CNC Lathe with Mazatrol T-Plus Control, 210mm diameter 3-Jaw Chuck, 8-Station Turret, Tailstock, Tooleye & Parts Catcher. S/No. 122607 (1996)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser