2329 - CNC Grinding, Milling and Machining Centres formerly used in the Aerospace Industry & Others

Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control, Hydraflow Coolant Recovery & Filtration Unit. S/No. 03970168 (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control, Hydraflow Coolant Recovery & Filtration Unit. S/No. N0M2046 (Circa 2000)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Table 600 mm x 200 mm,  Equipped with 4th Axis, Coolant/Filtration System (Installed 2002)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Strausak Fleximat 91 CNC 5 Axis Tool & Cutter Grinder with NUM 1060 F CNC Control, Turbo Seperator Coolant System. S/No, 13048

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control, Table Size 2286mm x 765mm, Max Load 3000kg, 40 – 6000 RPM, BT50 Spindle, Twin Swarf Conveyors, Coolant. X = 2032mm, Y = 762mm, Z = 770mm. S/No. 7052 A00 RA 0022 (1998)

Please Note: This Item is located in Nottinghamshire

This Machine must be removed from site by 6th October 2014

This Lot does not include any tooling, fixtures, or OE Unit that may be shown in the lot photographs

Okuma MX-55VB Vertical Machining Centre with OSP 700M Control, Table Size: 1300mm x 560mm,32-Station ATC, No. 50 Spindle Taper, 50 - 6,000rpm Spindle Speeds, X = 1050mm, Y = 560mm, Z = 450mm. S/No. 04950 (1998)

Please Note: This Item is located in Birmingham and can only be loaded free of charge to a low loader, with any other vehicle the purchaser would need to organise for the collection company to load the machine. Blocking and securing however will be at the cost of the purchaser

Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control, 30-Station ATC, Swarf Conveyor, Coolant, Erowa Easy Heind ITS 116 Loading System, S/No. 98017

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Heller MCP-H300 Twin Pallet Horizontal Machining Centre with Unipro CNC 90 Control, 630mm x 800mm Pallet Size, 1 Degree Indexing, DIN 50 Spindle, 52 ATC, Swarf Conveyor, Knoll Coolant System, Coolant Chiller, X = 1000mm, Y = 800mm, Z = 1100mm. S/No. 34-43429 (1998) with Tooling

Please Note: This Item is located in Tamworth

Huron PU661 CNC Milling Machine with Heidenhain TNC 407A Control, 2000mm x 700mm Table, 50 INT Spindle. S/No. 11435 (Rebuilt by Rudolf Carne 1996)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mazak H400 Twin Pallet Horizontal Machining Centre with Cam- M2 Control, 2 x 400mm Pallets, 60 ATC. S/No. 71880 (1987)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser