2329 - CNC Grinding, Milling and Machining Centres formerly used in the Aerospace Industry & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located Birmingham, Nottinghamshire & Tamworth
Lot 103 must be removed from site by 6th October 2014
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer only, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 17
Lot 100: Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control
Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control, Hydraflow Coolant Recovery & Filtration Unit. S/No. 03970168 (1997)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 101: Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control
Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control, Hydraflow Coolant Recovery & Filtration Unit. S/No. N0M2046 (Circa 2000)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 102: Jones & Shipman Dominator 624 CNC Surface Grinder
Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Table 600 mm x 200 mm, Equipped with 4th Axis, Coolant/Filtration System (Installed 2002)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 102A: Strausak Fleximat 91 CNC 5 Axis Tool & Cutter Grinder with NUM 1060 F CNC Control
Strausak Fleximat 91 CNC 5 Axis Tool & Cutter Grinder with NUM 1060 F CNC Control, Turbo Seperator Coolant System. S/No, 13048
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 103: Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control
Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control, Table Size 2286mm x 765mm, Max Load 3000kg, 40 – 6000 RPM, BT50 Spindle, Twin Swarf Conveyors, Coolant. X = 2032mm, Y = 762mm, Z = 770mm. S/No. 7052 A00 RA 0022 (1998)
Please Note: This Item is located in Nottinghamshire
This Machine must be removed from site by 6th October 2014
This Lot does not include any tooling, fixtures, or OE Unit that may be shown in the lot photographs
Lot 104: Okuma MX-55VB Vertical Machining Centre
Okuma MX-55VB Vertical Machining Centre with OSP 700M Control, Table Size: 1300mm x 560mm,32-Station ATC, No. 50 Spindle Taper, 50 - 6,000rpm Spindle Speeds, X = 1050mm, Y = 560mm, Z = 450mm. S/No. 04950 (1998)
Please Note: This Item is located in Birmingham and can only be loaded free of charge to a low loader, with any other vehicle the purchaser would need to organise for the collection company to load the machine. Blocking and securing however will be at the cost of the purchaser
Lot 104A: Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control
Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control, 30-Station ATC, Swarf Conveyor, Coolant, Erowa Easy Heind ITS 116 Loading System, S/No. 98017
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 105: Heller MCP-H300 Twin Pallet Horizontal Machining Centre
Heller MCP-H300 Twin Pallet Horizontal Machining Centre with Unipro CNC 90 Control, 630mm x 800mm Pallet Size, 1 Degree Indexing, DIN 50 Spindle, 52 ATC, Swarf Conveyor, Knoll Coolant System, Coolant Chiller, X = 1000mm, Y = 800mm, Z = 1100mm. S/No. 34-43429 (1998) with Tooling
Please Note: This Item is located in Tamworth
Lot 106: Huron PU661 CNC Milling Machine with Heidenhain TNC 407A Control
Huron PU661 CNC Milling Machine with Heidenhain TNC 407A Control, 2000mm x 700mm Table, 50 INT Spindle. S/No. 11435 (Rebuilt by Rudolf Carne 1996)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 107: Mazak H400 Twin Pallet Horizontal Machining Centre with Cam- M2 Control
Mazak H400 Twin Pallet Horizontal Machining Centre with Cam- M2 Control, 2 x 400mm Pallets, 60 ATC. S/No. 71880 (1987)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser