2329 - CNC Grinding, Milling and Machining Centres formerly used in the Aerospace Industry & Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located Birmingham, Nottinghamshire & Tamworth
Lot 103 must be removed from site by 6th October 2014
Käuferprovision
Es gilt ein Aufgeld von 15.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing by Appointment only with the Auctioneer only, please contact our Office on: + 44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 17
Los 100: Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control
Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control, Hydraflow Coolant Recovery & Filtration Unit. S/No. 03970168 (1997)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 101: Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control
Jones & Shipman Edgetek 5 Axis CNC Grinder with GE Fanuc 16M Control, Hydraflow Coolant Recovery & Filtration Unit. S/No. N0M2046 (Circa 2000)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 102: Jones & Shipman Dominator 624 CNC Surface Grinder
Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Table 600 mm x 200 mm, Equipped with 4th Axis, Coolant/Filtration System (Installed 2002)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 102A: Strausak Fleximat 91 CNC 5 Axis Tool & Cutter Grinder with NUM 1060 F CNC Control
Strausak Fleximat 91 CNC 5 Axis Tool & Cutter Grinder with NUM 1060 F CNC Control, Turbo Seperator Coolant System. S/No, 13048
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 103: Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control
Cincinnati Lancer 2000 Vertical Machining Centre with Accramatic A2100 Control, Table Size 2286mm x 765mm, Max Load 3000kg, 40 – 6000 RPM, BT50 Spindle, Twin Swarf Conveyors, Coolant. X = 2032mm, Y = 762mm, Z = 770mm. S/No. 7052 A00 RA 0022 (1998)
Please Note: This Item is located in Nottinghamshire
This Machine must be removed from site by 6th October 2014
This Lot does not include any tooling, fixtures, or OE Unit that may be shown in the lot photographs
Los 104: Okuma MX-55VB Vertical Machining Centre
Okuma MX-55VB Vertical Machining Centre with OSP 700M Control, Table Size: 1300mm x 560mm,32-Station ATC, No. 50 Spindle Taper, 50 - 6,000rpm Spindle Speeds, X = 1050mm, Y = 560mm, Z = 450mm. S/No. 04950 (1998)
Please Note: This Item is located in Birmingham and can only be loaded free of charge to a low loader, with any other vehicle the purchaser would need to organise for the collection company to load the machine. Blocking and securing however will be at the cost of the purchaser
Los 104A: Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control
Ferrari A17 Multi Axis CNC Machining Centre with E5200 CNC Control, 30-Station ATC, Swarf Conveyor, Coolant, Erowa Easy Heind ITS 116 Loading System, S/No. 98017
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 105: Heller MCP-H300 Twin Pallet Horizontal Machining Centre
Heller MCP-H300 Twin Pallet Horizontal Machining Centre with Unipro CNC 90 Control, 630mm x 800mm Pallet Size, 1 Degree Indexing, DIN 50 Spindle, 52 ATC, Swarf Conveyor, Knoll Coolant System, Coolant Chiller, X = 1000mm, Y = 800mm, Z = 1100mm. S/No. 34-43429 (1998) with Tooling
Please Note: This Item is located in Tamworth
Los 106: Huron PU661 CNC Milling Machine with Heidenhain TNC 407A Control
Huron PU661 CNC Milling Machine with Heidenhain TNC 407A Control, 2000mm x 700mm Table, 50 INT Spindle. S/No. 11435 (Rebuilt by Rudolf Carne 1996)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 107: Mazak H400 Twin Pallet Horizontal Machining Centre with Cam- M2 Control
Mazak H400 Twin Pallet Horizontal Machining Centre with Cam- M2 Control, 2 x 400mm Pallets, 60 ATC. S/No. 71880 (1987)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser