2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Käuferprovision
Es gilt ein Aufgeld von 15.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 94
Los 20: Colchester Student MK2 Gap Bed Centre Lathe
Colchester Student MK2 Gap Bed Centre Lathe, 13" Swing Over Bed, 25" Distance Between Centres, Quick Change Tool Post
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 21: Colchester Chipmaster Variable Speed Centre Lathe
Colchester Chipmaster Variable Speed Centre Lathe, 11.1/4" Swing over bed. 20" Distance Between Centres, 1.3/8" Spindle Bore. Spindle Speeds: 35-3000rpm, Motor Size 3HP, 3 Jaw Chuck, Quick Change Toolpost, 2 & 3 Point Steadies
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 22: Union Graduate Wood Turning Lathe
Union Graduate Wood Turning Lathe, Swing over bed 12", Distance between centres 30" with Bowl Turning Attachment
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 23: Kitchen & Wade 6' Radial Arm Drill
Kitchen & Wade 6' Radial Arm Drill, 5 Morse Taper Spindle, 3" Capacity, Speeds 16 to 750rpm
Please Note:- This machine is for Spares or Repair Only, Sold as is
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 24: Asquith OD1 4ft 6" Radial Arm Drill
Asquith OD1 4ft 6" Radial Arm Drill, No.5 Morse Taper, 31-830 rpm Speeds, Feeds .0083/.012/.017/.027 ins/rev. Box Table 42" x 33" x 20", DC Brake
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 24A: MAS VF4 5ft Radial Arm Drill
MAS VF4 5ft Radial Arm Drill with 5' Arm Length, 4 Morse Taper Spindle, Spindle Speeds upto 2000rpm, T-Slotted Box Table, Safety Insta Brake.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 25: Ajax TR40 type 1250 Hydrobloc Radial Arm Drill
Ajax TR40 type 1250 Hydrobloc Radial Arm Drill - Low Headroom, 4ft 6" Radius, No.4 Morse Taper Spindle, 40-1620 rpm Speeds, Box Table 24" x 20" x 20" (1995)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 25A: Pollard 3' Radial Arm Drill
Pollard 3' Radial Arm Drill with Rise & Fall T-Slotted Table, Table Size 36" x 29", 3 Morse Taper Spindle, 1" Capacity, Spindle Speeds 99 to 1210rpm, Power Feed to Spindle, Safety Brake.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 26: Mas Type VR2 Radial Arm Drill
Mas Type VR2 Radial Arm Drill, 36" Capacity, 3 Morse Taper (1 1/4"), Speeds 90-4500 rpm. Box Table 21" x 16" x 16", Telescopic Brake, Coolant
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 27: Huron NU4 Universal Miling Machine
Huron NU4 Universal Milling Machine, 1435mm x 460mm Table Size, Omiversal Vertical Head, 40 Int, Spindle, 3 Axis Digital Readout, 100mm X Travel (Table) 700mm Y Travel (Head), Spindle Speeds 30 -2066 rpm (1982)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser