2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Käuferprovision
Es gilt ein Aufgeld von 15.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 94
Los 10: Emco Turn 140 CNC Lathe
Emco Turn 140 CNC Lathe, Emcotronic T1 Control, 340mm Swing Over Bed, 158mm Swing Over Cross Slide, 300mm X & Y Traverse, 30mm Spindle Bore, Spindle Speeds 150-2500rpm
Please Note:- This Machine is for Spares or Repairs Only, Sold as is
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 11: Imatec ID-175 Centre Lathe
Imatec ID-175 Centre Lathe, 14" Swing over bed, 40" Between Centres, 1 5/8" Spindle Bore, Speeds 60 to 1600 rpm, Quick Change Toolpost
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 12: Stanley Gap Bed Centre Lathe
Stanley Gap Bed Centre Lathe, Swing Over Bed 21", Swing in Gap 36", Distance Between Centres 60", Speeds 13 to 800rpm, Spindle Bore 3 1/2"
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 13: Colchester Triumph 2000 Gap Bed Centre Lathe
Colchester Triumph 2000 Gap Bed Centre Lathe, 15" Swing over Bed, 9 1/2" Swing over Cross slide, 23" Swing in Gap, 50" Between Centres, 2 1/8" Spindle Bore, Speeds 25-2000 rpm, Imperial leadscrew & Dials, Quick change Toolpost & Holders, 3 Jaw Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 14: Dean Smith & Grace Type 13/1 Centre Lathe
Dean Smith & Grace Type 13/1 Centre Lathe, 13 1/2" Swing over bed, 42" between centres, 1 1/2" Spindle Bore, Ex. College
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 15: Ward 7DS Capstan Lathe
Ward 7DS Capstan Lathe, 2 1/4" Spindle Bore with Collet Chuck, 4 Way Toolpost, Rear Toolpost, Some Turret Tooling
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 16: Herbert 4 Capstan Lathe
Herbert 4 Capstan Lathe, 2" Spindle Bore, Collet Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 17: Ward 2DB Scholar Capstan Lathe
Ward 2DB Scholar Capstan Lathe, Collet Chuck, Dual Dials with Tooling
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 18: Herbert 2D Capstan Lathe
Herbert 2D Capstan Lathe (Square Head), 13" Swing over Bed, 7 1/2" Swing over Cross Slide, 8" Max Turning Length, 1 1/2" Spindle Bore, Speeds 50-2550 rpm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser
Los 19: Colchester Triumph 7 1/2" Gap Bed Centre Lathe
Colchester Triumph 7 1/2" Gap Bed Centre Lathe, 15" Swing Over Bed, 22" Swing in Gap, 30" Between Centres. 2" Spindle Bore, 2 & 3 Point Steadies. 3 Jaw Chuck, Quick Change Tool Post
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser