2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2

Engineering

Asta conclusa il

2013-12-12 15:00:00.0

Tempo residuo

Fine asta

Descrizione asta

Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

 

Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:

Up until Thursday 19th December 2013

and then from:

6th January 2014 to 16th January 2014

(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)

Premio dell'acquirente

Il premio dell'acquirente verrà addebitato a 15.00%.

IVA

IVA applicata pari al 20.00%.

Date ispezioni

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

L'acquirente è responsabile a proprie spese per lo scollegamento, smontaggio e rimozione degli articoli acquistati dal luogo dell'asta. Se l'acquirente intende esportare articoli acquistati all'asta, sarà responsabile a proprie spese a garantire e rispettare tutte le condizioni di esportazione del Regno Unito e l'ottenimento di eventuali licenze di esportazione.

Spunta la casella qui sotto e clicca su conferma


* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.

Avviso ai compratori

Termine ultimo pagamento

2013-12-16 17:00:00.0

Termine ultimo ritiro

2014-01-16 17:00:00.0

Spedizionieri

Squadre per il carico

Dettagli Esportazione/importazione dal UK

Lotti 1-10 di 94

La chiusura dell'asta relativa ad un lotto verrà posticipata se vengono effettuate offerte nei 10 minuti precedenti la sua chiusura.
Preview image
Chiusura:
12 dic 2013 15:20:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 1: Jones & Shipman 1011P Toolroom Surface Grinder

Jones & Shipman 1011P Toolroom Surface Grinder, Capacity 27" x 12", Power Rise and Fall to Wheelhead with Wheel Dresser, 24" x 12" Magnetic Chuck, Coolant Tank & Halogen Light

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 15:20:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 2: Jones & Shipman 1302 EIU Universal Cylindrical Grinder

Jones & Shipman 1302 EIU Universal Cylindrical Grinder, 14" Max Dia Ground with New Wheel. 27" Grinding length between centres, 7" Height from table to centre. Wheelhead speeds 2000 & 2650 rpm, Workhead Speeds 40-320 rpm, Grinding Wheel 12" x 1" x 5". 3 & 4 Jaw chuck, Magnetic Chuck, 2 Point Steady, 2 Wheel Dressers

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 16:30:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 3: Broadbent Schofield Gap Bed Centre Lathe

Broadbent Schofield Gap Bed Centre Lathe, 32" Swing Over Bed. 52" Swing in Gap, 216"(18') Distance Between Centres, 4" Spindle Bore, Spindle Speeds 10.5 to 750rpm, 3 & 4 Jaw Chucks, 2 x Face Plates, Fixed and Travelling Steadies, Change Gears. S/No. 8467-70

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 16:20:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 4: Viking VT630 Gap Bed Centre Lathe

Viking VT630 Gap Bed Centre Lathe, 3000mm Between Centres, 630mm Swing over Bed, 400mm Swing over Cross Slide, 75mm Spindle Bore, Speeds 9-1600 rpm, Rapdis to Saddle, 3 & 4 Jaw Chucks, Quick Change Toolpost, 800mm Face Plate, 2 & 3 Point Steadies. 2 Axis Digital Readout (1998)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 15:40:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 5: Ward 7D Combination Turret Lathe

Ward 7D Combination Turret Lathe, Swing Over Bed 16", Spindle Bore 5 1/4", Speeds 18 to 730rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 15:40:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 6: POTISJE PA25 Gap Bed Centre Lathe

POTISJE PA25 Gap Bed Centre Lathe, 10ft Between Centres , 21" Swing over Bed, 28" Swing in Gap, 12 1/4" Swing over Cross Slide, 3 1/2" Spindle Bore, Speeds 20 to 2000 rpm. 3 & 4 Jaw chuck, 2 & 3 Point Steadies, Face Plate & Quick Change Tool Post (1988)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 16:00:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 7: Labor Gap Bed Centre Lathe

Labor Gap Bed Centre Lathe, 450mm Swing over bed, 650mm Swing in Gap, 2100mm Between Centres, 75mm Spindle Bore, 3 & 4 Jaw Chucks, Fixed & Travelling Steadies, Quick Change Toolpost

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 15:10:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 8: Colchester Mascot 1600 Gap Bed Centre Lathe

Colchester Mascot 1600 Gap Bed Centre Lathe, 17" Swing over bed, 28" Swing in Gap, 80" Between Centres, 3" Spindle Bore, Speeds 20-1600rpm, Quick Change Toolpost, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 15:40:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 9: TOS SN 71C Gap Bed Centre Lathe

TOS SN 71C Gap Bed Centre Lathe, 800mm Swing Over Bed, 920mm Swing In Gap, 400mm Swing Over Cross Slide, 2000mm Distance Between Centres, 80mm Spindle Bore, 200mm 4 Jaw Chuck, Rapid Power to Saddle

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Preview image
Chiusura:
12 dic 2013 16:20:00 GMT
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
15.00%
IVA:
20.00%

Lotto 9A: XYZ Proturn 410 CNC Lathe

XYZ Proturn 410 CNC Lathe with Proto Trak LX2 Control, 470mm Swing Over Bed, 730mm Swing In Gap, 290mm Swing Over Cross Slide, 1250mm Distance Between Centres, 80mm Spindle Bore, 50-2,500rpm Variable Spindle Speeds, 3 Jaw Chuck, Quick Change Tool Post and 3 Point Steady.

Please Note:- These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categorie