2257 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others, Phase 2
Engineering
La subasta finalizó el
Tiempo restante
Descripción de la subasta
Location:- These Items are located in Ashton-Under-Lyne, Lancashire and Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 19th December 2013
and then from:
6th January 2014 to 16th January 2014
(There will be no clearance on site between 20th December 2013 and 5th January 2014 inclusive)
Prima del comprador
A los compradores Premium se les cobrará un 15.00%.
IVA
El IVA ascenderá a un 20.00%.
Vista de horas
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Tenga en cuenta: - Cualquier traducción mediante Google Translate no está garantizada como una traducción precisa y es solo para fines de guía. La descripción del lote en inglés es la descripción predominante y se le da el mejor conocimiento del subastador. Sin embargo, la precisión no está garantizada y el comprador debe verificarla antes de hacer una oferta.
Aviso a compradores
Fecha final de pago
Fecha final de expedición
Transportistas
Empresas de almacenamiento
Exportar / Importar desde el Reino Unido detalles
Lotes 1-10 de 94
Lote 1: Jones & Shipman 1011P Toolroom Surface Grinder
Jones & Shipman 1011P Toolroom Surface Grinder, Capacity 27" x 12", Power Rise and Fall to Wheelhead with Wheel Dresser, 24" x 12" Magnetic Chuck, Coolant Tank & Halogen Light
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 2: Jones & Shipman 1302 EIU Universal Cylindrical Grinder
Jones & Shipman 1302 EIU Universal Cylindrical Grinder, 14" Max Dia Ground with New Wheel. 27" Grinding length between centres, 7" Height from table to centre. Wheelhead speeds 2000 & 2650 rpm, Workhead Speeds 40-320 rpm, Grinding Wheel 12" x 1" x 5". 3 & 4 Jaw chuck, Magnetic Chuck, 2 Point Steady, 2 Wheel Dressers
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 3: Broadbent Schofield Gap Bed Centre Lathe
Broadbent Schofield Gap Bed Centre Lathe, 32" Swing Over Bed. 52" Swing in Gap, 216"(18') Distance Between Centres, 4" Spindle Bore, Spindle Speeds 10.5 to 750rpm, 3 & 4 Jaw Chucks, 2 x Face Plates, Fixed and Travelling Steadies, Change Gears. S/No. 8467-70
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 4: Viking VT630 Gap Bed Centre Lathe
Viking VT630 Gap Bed Centre Lathe, 3000mm Between Centres, 630mm Swing over Bed, 400mm Swing over Cross Slide, 75mm Spindle Bore, Speeds 9-1600 rpm, Rapdis to Saddle, 3 & 4 Jaw Chucks, Quick Change Toolpost, 800mm Face Plate, 2 & 3 Point Steadies. 2 Axis Digital Readout (1998)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 5: Ward 7D Combination Turret Lathe
Ward 7D Combination Turret Lathe, Swing Over Bed 16", Spindle Bore 5 1/4", Speeds 18 to 730rpm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 6: POTISJE PA25 Gap Bed Centre Lathe
POTISJE PA25 Gap Bed Centre Lathe, 10ft Between Centres , 21" Swing over Bed, 28" Swing in Gap, 12 1/4" Swing over Cross Slide, 3 1/2" Spindle Bore, Speeds 20 to 2000 rpm. 3 & 4 Jaw chuck, 2 & 3 Point Steadies, Face Plate & Quick Change Tool Post (1988)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 7: Labor Gap Bed Centre Lathe
Labor Gap Bed Centre Lathe, 450mm Swing over bed, 650mm Swing in Gap, 2100mm Between Centres, 75mm Spindle Bore, 3 & 4 Jaw Chucks, Fixed & Travelling Steadies, Quick Change Toolpost
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 8: Colchester Mascot 1600 Gap Bed Centre Lathe
Colchester Mascot 1600 Gap Bed Centre Lathe, 17" Swing over bed, 28" Swing in Gap, 80" Between Centres, 3" Spindle Bore, Speeds 20-1600rpm, Quick Change Toolpost, 3 Jaw Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 9: TOS SN 71C Gap Bed Centre Lathe
TOS SN 71C Gap Bed Centre Lathe, 800mm Swing Over Bed, 920mm Swing In Gap, 400mm Swing Over Cross Slide, 2000mm Distance Between Centres, 80mm Spindle Bore, 200mm 4 Jaw Chuck, Rapid Power to Saddle
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Lote 9A: XYZ Proturn 410 CNC Lathe
XYZ Proturn 410 CNC Lathe with Proto Trak LX2 Control, 470mm Swing Over Bed, 730mm Swing In Gap, 290mm Swing Over Cross Slide, 1250mm Distance Between Centres, 80mm Spindle Bore, 50-2,500rpm Variable Spindle Speeds, 3 Jaw Chuck, Quick Change Tool Post and 3 Point Steady.
Please Note:- These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.