2227 - Toolroom and Manual Machine Tools plus Miscellaneous Equipment formerly used by a Large Aeronautical Manufacturer & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Birmingham, Burntwood and Tamworth and Items will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 56
Lot 500: Harrison M540 Gap Bed Centre Lathe
Harrison M540 Gap Bed Centre Lathe 21’’ x 80’’ with 3 & 4 Jaw Chucks, 3-Point Steady, QCTP and Holders, Magnescale 2axis DRO S/No. 602/145
Please Note:- This Item is located in Tamworth will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 501: Harrison M400 Gap Bed Centre Lathe
Harrison M400 Gap Bed Centre Lathe 16’’ x 40’’ with 3 & 4 Jaw Chucks, Face Plate, 4-Way Tool Post, 3-Point Steady, Newall C80 DRO. S/No. 400
Please Note:- This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 502: Broadbent Scofield Type BSX Gap Bed Centre Lathe
Broadbent Scofield Type BSX Gap Bed Centre Lathe 21’’ x 72’’ with 3 & 4 Jaw Chucks, QCTP and Holders, 2-Point Steady. S/No. 8278-67
Please Note:- This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 503: Colchester Triumph 2000 Gap Bed Centre Lathe
Colchester Triumph 2000 Gap Bed Centre Lathe 15’’ x 50’’ with 3 & 4 Jaw Chucks, 4 Way Tool Post, Mitutoyo 2 axis DRO. S/No. 6/0044/25710
Please Note:- This Item is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 504: Hardinge Manual Lathe
Hardinge Manual Lathe with Collet Chuck, 3-Jaw Chuck, Collets, 12’’ between centres. S/No. 4037
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser
Lot 505: Hardinge 21i Vector CNC Lathe
Hardinge 21i Vector CNC Lathe with Fanuc 21i-T Control , Collet Chuck, 8-Station Turret, Parts Catcher S/No. CNC VOO3 (2000)
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 506: Ajax Model AJ 155 3ft 6’’ Radial Arm Drill
Ajax Model AJ 155 3ft 6’’ Radial Arm Drill, 4-Morse Taper Spindle, Insta Brake Fitted, 50-1500 RPM, Box Table 22’’ x 24’’ x 22’’ High and Coolant
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 507: Qualters & Smith Model QSR4 49’’ Radial Arm Drill
Qualters & Smith Model QSR4 49’’ Radial Arm Drill, 10’’ Spindle Stroke, 4-Morse Taper, Speeds 60-1750 RPM, Spindle Nose to Table 26’’ Max, Spindle Nose to Base 46’’, Rise and Fall Table 21’’ x 36’’ S/No. 897
Please Note: This Item is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 508: Mostana Model 2A554 6ft Radial Arm Drilling Machine
Mostana Model 2A554 6ft Radial Arm Drilling Machine, Spindle Speeds 18-2000 RPM, Box Table 24 ½’’ x 20’’, Jet Brake, Coolant, S/No. 9014 (1992)
Please Note: This Item is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 509: Friedrich Deckel KF1 Three Dimensional Pantograph
Friedrich Deckel KF1 Three Dimensional Pantograph with Drag Table, 1 to 1 Attachment
Please Note:- This item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser