2138 - Equipment no longer required due to the Retirement of the Directors at Sapphire Engineering & Fabrication and Others (Final Phase) —Items removed for convenience of free loading
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Hyde, Cheshire
Prime d'acheteur
'La prime d''acheteur sera fixée à 15.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 76
Lot 1: HAAS VF3 Vertical Machining Centre
HAAS VF3 Vertical Machining Centre, Table 48" x 18" (1219 x 457mm), X Axis 40" (1016mm). Y Axis 20" (508mm). Z Axis 25" (635mm). Max Rating 30 Hp. Max Speed 8100 rpm with 20 Tool Auto Tool Changer (2004)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 2: HAAS TL-3 CNC Lathe
HAAS TL-3 CNC Lathe, Swing over Front Apron 20", Swing over Cross Slide 13", Max Cutting Dia. 20", Max Cutting Length 60", Max Between centres 60", Spindle Bore 3 1/2", Motor 18 Hp (2006)
Please Note: THe Clamps for the Steady are Missing
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 3: XYZ SM3500 CNC Bed Milling Machine
XYZ SM3500 CNC Bed Milling Machine with Prototrak SM Control, 54" x 14" Bed, 18 1/2" Throat, Travel 31" x 20" x 23", Power Draw Bar (2001)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 4: XYZ Proturn 410 Gap Bed Centre Lathe
XYZ Proturn 410 Gap Bed Centre Lathe with Prototrak LX3 Control, Swing over Bed 18", Swing in Gap 24", Between Centres 48", Spindle Bore 3", Speeds 15 to 2500 rpm, 250mm 3-Jaw chuck, Quick Change Tool Post (1999)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 5: XYZ Proturn 410 Gap Bed Centre Lathe
XYZ Proturn 410 Gap Bed Centre Lathe with Prototrack LX3 Control, 18" Swing over Bed, 48" Between Centres
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 6: XYZ Proturn 1745 Gap Bed Centre Lathe
XYZ Proturn 1745 Gap Bed Centre Lathe with Prototrak LX2 Control, 17" Swing over Bed, 45" Between Centres, 2" Spindle Bore
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 7: EMCO Turn 140 CNC Lathe
EMCO Turn 140 CNC Lathe with Emcotronic T1 Control, 340mm Swing over Bed, 158mm Swing over Cross Slide, 300mm X & Y Travels, 36mm Spindle Bore, Speeds 150 - 2500rpm.
Please Note: It has been brought to our attention that this Machine is in need of repair, sold as is.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 8: Union BFT 80/2 Horizontal Boring, Facing & Milling Machine
Union BFT 80/2 Horizontal Boring, Facing & Milling Machine, 80mm Spindle Dia, 500mm Facing Head, 1125m x 1000mm Table Size
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 9: Cincinnati CIMX Horizontal CNC Machining Centre
Cincinnati CIMX Horizontal CNC Machining Centre with General Electric Control, Table Size: 60" x 24", Integral 30" Rotary Table
Please Note: This Machine has been disassembled for removal from site.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser
Lot 10: XYZ CNC 400 Bed Mill
XYZ CNC 400 Bed Mill with Fanuc OM Control, Table Size: 51" x 12"
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the Purchaser