2045 - Due to the Retirement of the Directors at Holme Valley Fabrication & Engineering & Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Bidding Ends:Tuesday 1st November 2011 at 3.00pm (UK Time)
Final Payment Date: Thursday 3rd November 2011 at 17:00:00
Final Clearance Date: Thursday 17th November 2011 at 17:00:00
Location
These Items are located in Cheshire & Lancashire - Items removed for convenience of sale
Käuferprovision
Es gilt ein Aufgeld von 15.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 10
Los 27: Herbert 4-Spindle Drill
Herbert 4-Spindle Drill, all Spindles No. 3 Morse Taper, (1) Spindle with Tapping, Table Size: 46” x 15”
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 27A: Pollard Type 150A 2-Spindle Drill
Pollard Type 150A 2-Spindle Drill on 3-Spindle Base, both Spindles NO. 3 Morse Taper, (1) Spindle with Tapping, Table Size: 35” x 15”
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 42: Town Woodhouse Radial Arm Drill
Town Woodhouse Radial Arm Drill, Rise & Fall Tilting Table Size: 36” x 24”
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 42A: Asquith Archdale Type SR40 Radial Arm Drill
Asquith Archdale Type SR40 Radial Arm Drill, Spindle Taper: 3 Morse, Spindle Speeds: 15 to 1500rpm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 53: Progress No. 3A Pillar Drill
Progress No. 3A Pillar Drill, No. 3 Morse Taper Spindle, Speeds: 70 to 1180rpm, 3-Phase Electrics
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 54: Elliot Progress 16 Pillar Drill
Elliot Progress 16 Pillar Drill, Capacity: 12mm, Speeds: 460 to 3500rpm, 3-Phase Electrics
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 55: Progress No. 1 Pillar Drill
Progress No. 1 Pillar Drill
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 94: Meddings Bench Drill
Meddings Bench Drill, ½” Capacity, Speeds: 500 – 4800rpm, Rise & Fall Head and Table, Single Phase, 240Volt
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 103: Fobco Star Floor Mounted Pillar Drill
Fobco Star Floor Mounted Pillar Drill, 13mm Capacity, Speeds: 475-4260rpm, Rise & Fall Head and Table, 12” x 8 1/2” Tilting Table, 3-Phase
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle
Los 109: Astra Bench Drill
Astra Bench Drill, Capacity: ½” diameter, Speeds: 480 to 2470rpm, Table Size: 9 ¼” x 9 ¼”, Single Phase
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle