2605 - High Quality CNC Machining Centres & Lathes plus other Toolroom Equipment previously used by Jordan Engineering Ltd, Phase 2
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at a cost of the purchaser.
Lot 2 & 2A Combination, 100 & 101 have the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm. Please see individual lot for information.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the
Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at:
info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 87
Los 1B: Fixture
Fixture
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 2: Doosan Mynx 7500/50 Vertical Machine Centre
Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = ,1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010) (Excluding Vice & 4th Axis Unit)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 2A: Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of Lots 2 & 2A
Combination of lots 2 & 2A
Lot 2 - Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = 1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Nikken 4th Axis Unit with 400mm 3-Jaw Chuck, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010)
and
Lot 2A - Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
This lot has the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 2 | Doosan Mynx 7500/50 Vertical Machine Centre |
| 2A | Nikken 4th Axis Unit with 400mm 3-Jaw Chuck |
Los 5: Mazak E – Tower 5 Axis Multitasking Turning / Milling Machine
Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 10A: Steady Suitable for Doosan 400
Steady Suitable for Doosan 400
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 14: Giewont Vertical FYA41M Milling Machine
Giewont Vertical FYA41M Milling Machine, Table Size 2m x 400mm, 50 International Tooling. S/No. 11/57, (1985)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Los 15: Pollard Multi Spindle Drill 31MX
Pollard Multi Spindle Drill 31MX, Table Size 33” x 29”. Ref/No.
30444A
Please Note: This Lot is in need of repair
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 20: Makita Bench Grinder
Makita Bench Grinder. S/No. 17016E
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchase
Los 21: Clarke Woodworker 6" Horizontal Belt Linisher
Clarke Woodworker 6" Horizontal Belt Linisher
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser