2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd

Engineering

Auktion beendet am

2017-06-14 15:00:00.0

Verbleibende Zeit

Auktion beendet

Artikelbeschreibung

Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Please click here to view a brochure for this auction

Käuferprovision

Es gilt ein Aufgeld von 16.00 %.

Mehrwertsteuer

Zzgl. Mehrwertsteuer in Höhe von 20.00 %.

Seitenaufrufe

Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.

Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

Der Käufer ist auf seine Kosten für das Abklemmen, Abbauen und Entfernen der gekauften Gegenstände vom Versteigerungsort verantwortlich. Beabsichtigt der Käufer, bei der Auktion erworbene Gegenstände zu exportieren, ist er auf eigene Kosten dafür verantwortlich, die Einhaltung aller britischen Exportbedingungen und den Erhalt aller anwendbaren Ausfuhrlizenzen sicherzustellen

Bitte markieren Sie das nachfolgende Kästchen und klicken Sie auf ”Bestätigen“.


* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.

Hinweis für die Käufer

Datum der letzten Zahlung

2017-06-16 17:00:00.0

Endgültiges Freigabedatum

2017-06-29 17:00:00.0

Versandunternehmen

Lagerfirma

Details zum Exportieren/Importieren aus Großbritannien

Gesonderte Bedingungen

Lose 1-9 von 9

Die Gebote werden für einzelne Lose verlängert, wenn Gebote innerhalb von 10 Minuten nach der Endzeit des Artikels abgegeben werden.
Preview image
Endet:
14 Jun 2017 16:30:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 104: Daewoo Puma 400B CNC Lathe

Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267, 10 Station Turret. S/No. 4449 (2011) (9) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Endet:
14 Jun 2017 16:10:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 105: Daewoo Puma 400B CNC Lathe

Daewoo Puma 400B CNC Lathe with Fanuc 21i-TB Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye, 530mm Chuck, Swarf Conveyor, Power on Time Hours: 12,246, Running Hours: 6,007, Cutting Hours: 4,395, 10 Station Turret. S/No. 2249 (2006) (6) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Endet:
14 Jun 2017 15:50:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 106: Daewoo Puma 400LB CNC Lathe

Daewoo Puma 400LB CNC Lathe with Fanuc 18-iT Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 2100mm between Centres, Tooleye, Swarf Conveyor & 450mm Chuck, Power on Time Hours: 24,306, Running Hours: 7,709, Cutting Hours: 7,466, 20 Station Turret.  S/No. 1100 (2001) (8) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Endet:
14 Jun 2017 16:50:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 107: Daewoo Puma 2600L CNC Lathe

Daewoo Puma 2600L CNC Lathe with Fanuc i Series Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 1500mm between Centres, 12" Chuck, Tooleye & Parts Catcher, Power on Time Hours: 3,548, Running Hours: 1,700, Cutting Hours: 875, 12 Station Turret. S/No. 374 (2013) 

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Endet:
14 Jun 2017 16:10:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 108: Daewoo Puma 280 CNC Lathe

Daewoo Puma 280 CNC Lathe with Fanuc 21-TB Control, Swing over Bed: 630mm, Swing over Saddle: 500mm, 630mm between Centres, 12" Chuck, Tooleye, Parts Catcher, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474, 10 Station Turret.  S/No. 046 (2006) (6) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Endet:
14 Jun 2017 16:30:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 109: Daewoo Puma 240L CNC Lathe

Daewoo Puma 240L CNC Lathe with Fanuc i Series Control, Swing over Bed: 550mm, Swing over Saddle: 390mm, 630mm between Centres, Tooleye, 12" Chuck, Swarf Conveyor & Cooljet, Power on Time Hours: 17,939, Running Hours: 6,514, Cutting Hours: 4,474, 10 Station Turret.  S/No. 746 (2004) (7) Tools

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Endet:
14 Jun 2017 16:20:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 110: Harrison Alpha 1550 XS Computerised Centre Lathe

Harrison Alpha 1550 XS Computerised Centre Lathe with GE Alpha X Series Control, Max. Swing over Bed: 554mm, 2000mm between Centres, Manual Chuck, Q.C.T.P, 2000rpm, Spindle Bore: 100mm, Quick Change Toolpost. (2010)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Preview image
Endet:
14 Jun 2017 15:30:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 111: Harrison Alpha 550 Plus Computerised CNC Gap Bed Lathe

Harrison Alpha 550 Plus Computerised CNC Gap Bed Lathe with GE Fanuc Control, Max. Swing over Bed: 554mm, Max. Swing in Gap: 828mm, 1500mm between Centres & Quick Change Toolpost (1999)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

Preview image
Endet:
14 Jun 2017 15:40:00 BST
Verbleibende Zeit:
Auktion beendet
Aufgeld:
16.00%
MwSt-Satz:
20.00%

Los 112: Harrison M390 Gap Bed Centre Lathe

Harrison M390 Gap Bed Centre Lathe with Newall D.R.O, Swing over Bed: 400mm, 1250mm between Centres, Q.C.T.P, Steady (1996)

Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Kategorien